Transformer Automatic Taping Machine
HY-B02 Transformer Automatic Taping Machine is used for the packaging of iron core tape and insulating tape of various high and low frequency transformers, inductor coils, relays, chargers, USB film, etc. It is controlled by single chip microcomputer, 7.5p motor running, high quality. , high efficiency, low noise. Efficiency requirements (capacity requirements): Hourly: about 2800pcs, the tape level is the same, the tape is tight.
First, the basic use:
1. Achieve tape/encapsulation on the surface of various workpieces, such as high-frequency transformers, USB chargers, high-light products for injection molding hardware, plastic cover film, etc.
2. The tape level is the same, the tape is tight and uniform, the inductance is uniform, efficient, time-saving, labor-saving, saving human resources;
3. Imported motor, imported electronic accessories, high sensitivity, switching power supply, to avoid voltage instability, and the machine can not start.
Second, the scope of application
1. Application industry: widely used in electronics, hardware, plastics, cosmetics, daily chemicals and other industries
Third, technical parameters
1. Membrane ring range: 34mm--77mm are applicable.
2. Number of windings: 1 - 9 turns, the number of turns can be set arbitrarily.
3. Two-axis wheelbase: The axial distance of the film cloth can be adjusted from 25mm to 85mm.
4. Size: length 430x width 300x height 260mm (plastic wheel bracket length 130mm), about 25KG
5. Material construction: the main part is made of S45C steel material
6. Optional features:
a. Automatic material return, easy to operate, improve efficiency (in combination with product considerations);
b. The motor speed is 7.5 horses or 10 horses (the smaller the number, the faster the speed);
c. Other functions (customized according to customer requirements);
Fourth, equipment features
1. The position of the film or tape can be finely adjusted, the tensioner can be adjusted, the film can be automatically filmed, the film can be automatically cut, and the glue can be automatically encapsulated.
2. Different fixtures can be replaced with different fixtures. The commissioning is simple and quick, and can be completed in a short time. Any vertical and horizontal transformers can be covered with rubber, and the replacement varieties are simple and quick, suitable for various operations;
3. This machine adopts microcomputer program control and geared motor transmission to ensure the stability of the machine during operation;
4. Intelligent control system: double display window, A shows the number of turns required for setting, B shows the output of work (can eliminate the output);
5. Tape error range: ± 0.2mm error;
6. Two winding tape heads, replacing each other, can increase the output;
7. It can be adjusted according to the size of the magnetic core, and the setting is simple;
8. The number of turns can be set, the tape is automatically cut and processed;
9. The tension of the wrapping tape is adjustable, the three-point one-line parallel feeding belt, the winding tape is parallel, and the closing is consistent;
10. This machine is compatible with manual/automatic;
Five, the operation steps
1. Working process: manually put the product -> pedal start -> envelope, cut off (automatic realization of the equipment) -> take out the packaged product.
