The Automatic Double Cylinder Vacuum Impregnation Machine is used for vacuum varnish process processing of insulating paints for electronic products such as motors, SMD chip inductors, PCB circuit boards and relays.
Tansformer Automatic Double Cylinder Vacuum Impregnation Machine is controlled by CNC single-chip microcomputer. The controller can store 0-100 products. The cylinder size can be customized according to customer requirements.
Fully automatic single cylinder vacuum impregnation machine parameters:
Power supply : AC380V 50/60HZ
Cylinder internal volume: L710*W540*H300mm
Sub-disk size: L660*W530*H105mm
Machine size: L2600*W660*H1300mm
Standard impregnation Tansformer product height: approx. 80mm (custom height can be customized according to customer requirements)
Fully Automatic Double Cylinder Vacuum Impregnation Machine features:
1. Adopting stepper motor drive precision ball screw with moving slot lifting type impregnation, preset lifting height; preset lifting height (maximum stroke of sub-slot 80mm; displacement accuracy ±0.05mm)
2. The screw jack has high bearing capacity and high control precision. The PIN will not stick to the varnish, and there is no need for secondary tin plating.
3.CNC core single-chip control, can preset a variety of impregnation modes, with timely, appropriate elimination of bubble function;
4. Automatic switch box cover, secondary automatic vacuuming, saving time and effort, environmental protection, energy saving, single-person multi-machine operation.
5. The whole groove is made of 10MM steel plate. Double glass observation window for viewing immersion at any time
6. Impregnation time can be set;
7. With timing alarm, motor overload protection and phase loss protection;
8. Exhaust filtration and recycling, with environmental protection and recycling double-effect function;
9, all Chinese CNC single-chip control, intelligent vacuum, to achieve no bubble 凡立水, impregnation effect is beautiful.
Tansformer Automatic Double Cylinder Vacuum Impregnation Machine operation mode:
(1) First input the parameters of the impregnation product into the controller (vacuum time, exhaust time, soaking time, defoaming time).
(2) Set the parameters, just one (start) button to complete a series of product impregnation.
(3) Automatic alarm, automatic opening and manual removal and completion of the product.