Shenzhen automatic double cylinder vacuum impregnation machine pilot transformer efficient production machinery and equipment
“Dip coating” is a key process in the process of transformer production. The key to perfecting this process is the choice of equipment for the platform. Everytransformer product will be wound - tape - wiring - wire solder -assembly - measuring the phase ratio - the inductance test - copper tape- dipping paint baking, etc. Step; if the dipping paint is not done well, the previous process will also be affected. Therefore, it can be seen that the dip paint plays a crucial step.
Ourfully automatic two-cylinder vacuum impregnation machine has more thanten years of experience, specializing in solving all kinds of incurablediseases encountered in the process of dipping paint. Here are some of the problems encountered with these manual dipping machines:
Problem:The manual impregnation machine cannot set the impregnation time andrequires the worker to check it at the right time. No defoaming function.
Solution: Huiyue impregnation machine can automatically set theimpregnation time, andvacuum impregnation machine can also set the vacuuming time, exhaust time,soaking time and defoaming time.
Question 2: The manual impregnation machine cannot automatically openand close the cover, requiring manual operation by the worker.
Solution: Huiyue impregnation machine can automatically switch thecover, with timing alarm, motor overload protection and phase lossprotection.
Question 3: The manual impregnation machine cannot set the sub-tank lifting height and requires manual manual positioning.
Solution:Huiyue impregnation machine adopts stepping motor drive precision ballscrew with moving slot lifting type impregnation, which can presetlifting height (maximum stroke of sub-slot 60mm; displacement accuracy±0.05mm).
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.