HY-Z03 automatic vacuum impregnation machine cooling fan brushless brushless motor insulation dipping treatment
The fan motor vacuum dip varnish insulation treatment refers to the insulation treatment of the motor winding under vacuum sealing. Compared with the traditional insulation treatment process. The traditional insulation treatment process requires manual operation of the motor windings, which is not ideal for time-consuming products.
In contrast, HY-Z03 automatic vacuum impregnation machine, our machine is used to perform insulation treatment of fan motor windings has very good results. Our fully automatic vacuum impregnation machine can set the impregnation accuracy to the upper and lower value of 0.1mm, so as to carry out precise impregnation and insulation treatment of the motor. The whole process is highly automated. One operator can take care of multiple machines, saving labor for the factory, which is very impressive for the meager cooling fan industry.
First, let ’s compare the difference between manual and automatic machines, and then make a decision.
Huiyue automatic vacuum impregnation machine:
1. Controlled by PLC controller, the operation is simple, as long as the height and time of dipping paint are set on the PLC, it can be completed by one key. The PLC also has 0 to 500 stored dipping data of the product.
2. With defoaming function, the height can be reserved for the dipping paint.
3. The product does not move, and the standing water rises and soaks in the sub-panel. The rising water keeps the same level every time.
4. Sealing silicone rubber block, width 50mm, good sealing.
5. The cylinder automatically opens and closes the cover.
6. More environmentally friendly, dripping paint in the cylinder of the fully automatic machine, insulating paint is not wasted. Vacuum pump has filtering function to eliminate odor
Semi-automatic impregnation machine
1. Adopt timer alarm mode, dipping height and time, use timer to remind the time is up, shut down the machine by hand.
2. The product does not move, the vacuum directly pumps the vertical water to rise for soaking, the impregnation height is controlled by the naked eye, and the valve for transporting the vertical water is closed after reaching a suitable height.
3. Sealing strips are used for sealing.
4. Manually close and open the cover.
After comparison, we clearly see that Huiyue's fully automatic machines have many advantages, and there are currently many cooling fan motor motor manufacturing plants in the country that have introduced our machines, and have been widely praised, if you are still using For manual impregnation machines, it should be time to consider replacing them.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.