How to choose UV lamp tube for curing oven? How is the replacement carried out?

How to choose UV lamp tube for curing oven? How is the replacement carried out?

The choice of the lamp should pay attention to the ultraviolet radiation intensity of the lamp. The power of the UV lamp is the radiation intensity of the UV light, also called the penetrating power. Some of the UV power sold in the market does not match the actual power and can be measured using an ultraviolet radiation meter.
 
First, it must meet the spectral wavelength and power density requirements of UV ink (varnish) absorption. If the power of the UV lamp is not enough, even if the illumination time is longer, the number of times of passing the UV curing device is more, and the product does not reach full curing. On the contrary, the surface layer of the UV ink (varnish) is aged, blocked, and brittle, and the adhesion of the ink (varnish) is also poor, which may result in poor adhesion between the layers of the overprint. Because low-power UV light cannot penetrate the bottom of the ink layer, the bottom is not cured or cured.
 
UV curing machine, uv curing oven
 
The UV lamp power generally needs to meet the requirements of 80-120W/cm2, but the higher the power, the greater the heat, so the power should be selected according to the cured product and the curing speed.
 
The replacement of the UV lamp also requires the use of an ultraviolet radiation meter to check whether the illumination intensity meets the UV curing strength standard. The intensity of the UV lamp depends on the power density of the UV lamp. The common specifications are: 80W/cm2, 120W/cm2. , 160W/cm2 and 240W/cm2.
 
When the intensity of the ultraviolet light irradiated by the ultraviolet lamp for a long time becomes weak, the curing effect is affected. At the same time, it is recommended to clean the surface of the lamp tube and the reflector on the surface of the reflector with absolute ethanol at the appropriate time according to the production environment (air dust content), and then turn the UV lamp tube 90°. This is advantageous for all UV radiation to be effectively radiated to the UV ink or varnish.

The above is how to choose UV lamp tube for curing oven? How is the replacement carried out? The introduction, if you need to buy or customize the UV curing oven, you need to buy or customize the transformer automatic production equipment, you can contact our company, contact our business staff to buy or customize, thank you.

I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following is the introduction of our company and some automation equipment supplied by our company. If you need to purchase or customize these automation equipment, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards, and its product series include: transformer inserter, transformer automatic inserter, ei-type transformer automatic inserter, transformer EI inserter, transformer core inserter, transformer automatic casing machine,Transformer automatic through insulation casing machine，Transformer core assembly machine, transformer core assembly rubber machine, (automatic core assembly + package tape + test + wobble plate), automatic winding machine, transformer winding machine, transformer automatic winding machine, Automatic Coil Winding Machine，transformer coil winding Machine, transformer coil automatic winding machine, Transformer Core Automatic Winding Machine，CNC winding machine, CNC automatic winding machine, CNC coil winding machine, single-axis coil winding machine, CNC single-axis winding machine, CNC single-axis coil winding machine, single-axis Winding machine, double shaft winding machine, multi-axis winding machine, 6/8/16/12 axis automatic winding machine, 6/8/16/12 axis automatic transformer winding machine,Coil Spindle Winding Machine，Single Spindle Winding Machine，fully automatic winding + Tape machine, (USB charger automatic film machine), automatic rubber machine, semi-automatic tape machine, transformer double pressure automatic rubber machine, transformer magnetic ring inductance double pressure automatic rubber machine, vacuum impregnation machine, ( There are single and double cylinder differences: single cylinder automatic vacuum impregnation machine, double cylinder Automatic vacuum impregnation machine),Vacuum pressure impregnation electric motor equipment，vacuum pressure impregnation process for transformers，vacuum pressure impregnation (vpi)，automatic soldering machine and semi-automatic soldering machine (also called flip soldering machine), transformer flip soldering machine, transformer automatic flip soldering machine, double-head soldering machine,Angular Soldering Machine，Transformer Angular Soldering Machine，transformer copper foil adhesive machine, desktop automatic dispensing Machine, full vision COB dispensing machine, transformer filling vacuum defoaming machine, magnetic ring inductance pulling and shearing machine, magnetic ring inductance automatic foot machine, computer cutting wire stripping machine, automatic locking screw machine, double Y axis coordinates Automatic locking screw machine,automatic taping machine，automatic coil taping machine，Transformer Automatic Taping Machine，transformer core taping machine，transformer comprehensive tester, automatic constant temperature oven, infrared tunnel furnace, ultraviolet curing oven, baking line，Transformer assembly production line，core automation production line and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency transformers, ballasts and motor factory industry . In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

The following is the contact information of our company. If you need to purchase or customize the automation equipment listed above, you need to purchase or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Contact: Phone / WeChat: 18819603799
              QQ: 3407993243
              Email:3407993243@qq.com
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City