What should I pay attention to when using an industrial oven? What is the workflow?

2019-06-27 10:01:22 HUIYUECN 0

What should I pay attention to when using an industrial oven? What is the workflow?

Recently I bought an oven in the factory, mainly baking the glue on the transformer. What details should I pay attention to during the use?
Dongguan Juke Industrial Equipment Engineer answers your questions:
1. Industrial ovens should be placed indoors dry and level to prevent vibration and corrosion.
2. Pay attention to safe use of electricity, install a power supply knife of sufficient capacity according to the power consumption of the oven. Use enough power leads and have a good grounding wire.
3. The oven with the electric contact mercury thermometer type thermostat should connect the two wires of the electric contact thermometer to the two terminals on the top of the box. Another ordinary mercury thermometer is inserted into the exhaust valve.

(The thermometer in the exhaust valve is used to check the electrical contact mercury thermometer and observe the actual temperature inside the box.) Open the exhaust valve. Adjust the electrical contact mercury thermometer to the required temperature and tighten the screws on the steel cap.

In order to achieve the purpose of constant temperature. However, care must be taken not to turn the indicator iron out of the scale when adjusting.
4. When all preparations are ready, put the sample into the industrial oven, then connect and turn on the power. The red indicator light indicates that the box is heated. When the temperature reaches the controlled temperature,

The red light is off and the green light is on and the temperature is on. In order to prevent temperature control failure, you must also look after it.
5. When placing the sample, please note that the arrangement should not be too dense. The test piece should not be placed on the heat sink to avoid affecting the upward flow of hot air. It is forbidden to bake flammable, explosive, volatile and corrosive items.
6. When you need to observe the sample in the working room, you can open the outer door and observe through the glass door. However, it is better to open the door as little as possible to avoid affecting the constant temperature.

Especially when working above 200 °C, opening the door may cause the glass door to quench and rupture.
7. An industrial oven with blasting, the blower must be turned on during heating and constant temperature, otherwise it will affect the uniformity of the temperature of the working chamber and damage the heating element.
8. After the work is completed, the power should be cut off in time to ensure safety.
9. Keep the inside and outside of the industrial oven clean.
10. When using, the temperature should not exceed the maximum operating temperature of the oven.
11. To prevent burns, use special tools when handling samples.
Your satisfaction is our constant pursuit! We continue to provide new and old customers with: hard quality equipment, preferential prices, quality service!
Juke specializes in the production of precision ovens, industrial ovens, industrial ovens, high temperature ovens, high temperature oven series, and Juke Industrial brand series industrial ovens, which have been well-known for more than ten years.

Has a wealth of design and production experience, and provides customers with a perfect solution to the entire package. User satisfaction is the best affirmation for us. Welcome to the new and old customers to visit the exchange company guidance!

Industrial oven.jpg

Industrial oven.jpg

Which of the above should you pay attention to when using an industrial oven? What is the workflow? Introduction, if you need to buy or customize industrial oven / industrial oven, you need to buy or customize transformer automation production equipment, you can contact our company, contact our business staff to buy or customize, thank you.

I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following is the introduction of our company and some automation equipment supplied by our company. If you need to purchase or customize these automation equipment, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards, and its product series include: transformer inserter, ei-type transformer automatic inserter, transformer automatic inserter, transformer EI inserter, transformer core inserter, transformer automatic casing machine,Transformer automatic through insulation casing machine,Transformer core assembly machine, transformer core assembly rubber machine, (automatic core assembly + package tape + test + wobble plate), automatic winding machine, transformer winding machine, transformer automatic winding machine, Automatic Coil Winding Machine,transformer coil winding Machine,Transformer coil automatic winding machineTransformer Core Automatic Winding MachineCNC winding machine, CNC automatic winding machine, CNC coil winding machine, CNC single-axis winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/ 12-axis automatic winding machine, 6/8/16/12 axis automatic transformer winding machine, single-axis coil winding machine,Coil Spindle Winding MachineSingle Spindle Winding Machine,automatic winding + wrapping tape machine, (USB charger automatic film wrapping machine), automatic Packing machine, semi-automatic tape machine, transformer double pressure automatic rubberizing machine, transformer magnetic ring inductance double pressing automatic rubberizing machine, vacuum impregnation machine, (single single and double cylinder difference: single cylinder automatic vacuum impregnation machine, Double cylinder automatic vacuum impregnation machine),Vacuum pressure impregnation electric motor equipmentvacuum pressure impregnation process for transformersvacuum pressure impregnation (vpi),automatic soldering machine and semi-automatic Tin machine (also called flip soldering machine), transformer flip soldering machine, transformer automatic flip soldering machine, double head soldering machine,Angular Soldering MachineTransformer Angular Soldering Machine,transformer copper foil adhesive machine, desktop automatic dispensing machine, full vision COB dispensing machine, transformer irrigation Rubber vacuum defoaming machine, magnetic ring inductor pulling and forming machine, magnetic ring inductor automatic foot machine, computer cutting wire stripping machine, automatic locking screw machine, double Y axis coordinate type automatic locking screw machine,automatic taping machineautomatic coil taping machineTransformer Automatic Taping Machinetransformer core taping machine,transformer comprehensive tester, Automatic constant temperature oven, infrared tunnel furnace, ultraviolet curing oven, baking line,Transformer assembly production linecore automation production line and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency transformers, ballasts and motor manufacturers. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

The following is the contact information of our company. If you need to purchase or customize the mechanical equipment listed above, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Contact: Phone / WeChat: 18819603799
              QQ: 3407993243
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552