How to maintain the muffle furnace (high temperature furnace)? What precautions?
Maintenance and precautions for muffle furnace (high temperature furnace):
1. When the muffle furnace is used for the first time or after long-term deactivation, the oven must be performed. The time of the oven should be 200 ° C for four hours at room temperature. 200 ° C to 600 ° C for four hours. When using, the furnace temperature should not exceed the rated temperature to avoid burning the heating elements. It is forbidden to infuse the furnace with various liquids and easily soluble metals. The muffle furnace is best to work below 50 °C below the maximum temperature, at which time the furnace has a long life.
2. The muffle furnace and controller must work in a location where the relative temperature does not exceed 85% and there is no conductive dust, explosive gas or corrosive gas. When a metal material such as grease is required to be heated, a large amount of volatile gas will affect and corrode the surface of the electric heating element to destroy and shorten the life. Therefore, when heating, it should be prevented and sealed in a timely manner or properly opened to eliminate.
3. The muffle controller should be limited to use in the ambient temperature range of 0-40 °C.
4. According to the technical requirements, regularly check whether the wiring of each electric furnace and controller is good, whether there is any stuck or stuck phenomenon when the indicator pointer moves, and use the potentiometer to check the instrument due to magnetic steel, demagnetization, wire drawing, and shrapnel. The increase in error caused by fatigue, balance damage, and the like.
5. Do not pull out the thermocouple at high temperatures to prevent the jacket from bursting.
6. Always keep the furnace clean and remove the oxides in the furnace in time.
The above is how to maintain the muffle furnace (high temperature furnace)? What precautions? The introduction, if you need to buy or customize the muffle furnace (high temperature furnace), you need to buy or customize the transformer automatic production equipment, you can contact our company, contact our business staff to buy or customize, thank you.
I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.
The following is the introduction of our company and some automation equipment supplied by our company. If you need to purchase or customize these automation equipment, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.
Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards, and its product series include: transformer inserter, ei-type transformer automatic inserter, transformer EI inserter, transformer core inserter, transformer automatic casing machine, Transformer automatic through insulation casing machine，transformer core assembly machine, Transformer core assembly rubberizing machine, (automatic core assembly + bag tape + test + wobble plate), transformer winding machine, transformer automatic winding machine, Transformer Core Automatic Winding Machine，Automatic Coil Winding Machine，transformer coil winding machine, transformer coil automatic winding machine, Coil Spindle Winding Machine，Single Spindle Winding Machine，CNC winding Wire machine, CNC automatic winding machine, CNC coil winding machine, CNC single-axis winding machine, single-axis coil winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8 /16/12 axis automatic winding machine, 6/8/16/12 axis automatic transformer winding machine, automatic winding + wrapping tape machine, (USB charger automatic coating machine), automatic rubberizing machine, Semi-automatic tape machine, transformer double pressure automatic rubberizing machine, transformer magnetic ring inductance double pressure automatic rubberizing machine, vacuum impregnation machine, (single single and double cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic Vacuum impregnation machine),Vacuum pressure impregnation electric motor equipment，vacuum pressure impregnation process for transformers，vacuum pressure impregnation (vpi)，automatic soldering machine and semi-automatic soldering machine ( Called flip soldering machine), transformer flip soldering machine, transformer automatic flip soldering machine, double head soldering machine,Angular Soldering Machine，Transformer Angular Soldering Machine，desktop automatic dispensing machine, full vision COB dispensing machine, transformer copper foil adhesive machine, magnetic ring inductor tensile cutting One machine, magnetic ring inductor automatic foot machine, automatic locking screw machine, double Y-axis coordinate type automatic locking screw machine, transformer filling vacuum defoaming machine, computer cutting wire stripping machine,automatic taping machine，Transformer Automatic Taping Machine，automatic coil taping machine，transformer core taping machine，transformers core taping machine，transformer comprehensive tester, automatic constant temperature oven, Infrared tunnel furnace, UV curing furnace, baking line，Transformer assembly production line，core automation production line and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency transformers, ballasts and motor manufacturers. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.
The following is the contact information of our company. If you need to purchase or customize the above-mentioned production automation equipment, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Contact: Phone / WeChat: 18819603799
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.