Automatic CNC winding machine spindle dual power supply synchronization technology

Automatic CNC winding machine spindle dual power supply synchronization technology

Common automatic CNC winding machines are wound around many spindle power modes. That is, the main shaft of the tail is unpowered, only in the process of assisting the windings. The power of its rotation is through the spindle through the workpiece on the spindle. If the workpiece is flexible, in some special cases, the workpiece is flexible and is made of thin glass, mica, etc. Torque workpiece. At this time use the main bearing two power conditions. The speed of the spindle is consistent with the tailstock.. This is not the winding process of the workpiece to ensure that the stranding is soft or even scrapped.

Automatic CNC Winding Machines have two main methods for achieving this. 1.2 The motor is directly controlled at the same time. /stop, sync speed. 2. The method of synchronizing the drive shaft. Most of the drive shafts are currently used for synchronous drives. Because of its simple structure, easy maintenance, stable and reliable. However, the disadvantage in the transmission process is that the characteristics of the mechanical clearance can be started and stopped.. There is a certain angular difference in order to compensate for the development of the spindle axis and the spindle of this defect, the servo control system synchronization will be used in the future.