How to install a high temperature muffle furnace? How to use after installation?
Muffle furnace installation and use
1. The electric furnace is integrated, and the electric furnace does not need special installation, and it only needs to be placed on the indoor floor or the bench. In order to operate safely, the electric furnace needs to be reliably grounded.
2, check the wiring is correct, you can power on, first close the power switch, then pull the button switch on the controller panel to the open position, pull the setting switch to the set position, adjust the setting knob, the temperature Set to the degree you want, then pull the setting switch to the measured position. At this time, the red light is on (NO), there is also the sound of the contactor, the electric furnace is energized, and the ammeter indicates the heating current value. The temperature rises slowly as the temperature inside the furnace rises, indicating that the work is normal.
When the temperature rises to the set desired temperature, the red light is off (NO), the green light is on (OFF), the electric furnace is automatically powered off, and the temperature rise is stopped. Later, when the temperature in the furnace drops slightly, the green light is off, the red light is on, and the electric furnace is automatically energized. Repeatedly, the purpose of automatically controlling the temperature inside the furnace is achieved.
3. The heating power of the silicon carbon rod type (S type) furnace should be well matched with the required temperature value. When the temperature in the furnace enters the constant temperature stage, the long time of the green light indicates that the heating power is too large, and the heating power adjustment knob can be adjusted counterclockwise to appropriately reduce the heating current value; if the red light is on for a long time, the heating power is insufficient. Adjust the heating power adjustment knob clockwise to increase the heating current value appropriately. When the red and green lights are alternately lit, the time is consistent, indicating that the power is matched and the adjustment effect is good. In order to reduce the over-temperature phenomenon during the heating process, the heating power adjustment knob can be adjusted counterclockwise to appropriately reduce the heating current value before the temperature reaches the set temperature. Considering that the thyristor component is more susceptible to damage when the current is solid, the heating power adjustment knob should be turned counterclockwise until the current is turned up and down.
4. In order to check whether the breaker protection device works normally, the method is: loosen one end of the thermocouple, and the temperature measurement indicator rises rapidly to the highest point, and the heating power supply is automatically cut off, then the breaker device is good, and the thermocouple is reconnected. After that, it works fine.
5. Oven, when the electric furnace is used for the first time or after long-term deactivation, it must be oven. The procedure is as follows:
When the room temperature rises 200 ° C for 4 hours (open the furnace door to allow water vapor to emanate)
When 200 ° C rises 600 ° C for 4 hours (close the furnace door)
When 600 ° C rises 800 ° C for 2 hours (close the furnace door)
6. After use, first pull the toggle switch on the controller panel to the off position, then cut off the main power switch.
The above is how to install a high temperature muffle furnace? How to use after installation? The introduction, if you need to buy or customize high temperature muffle furnace, you need to buy or customize transformer automatic production equipment, you can contact our company, contact our business staff to buy or customize, thank you.
I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.
The following are the introductions of our company and some mechanical equipment supplied by our company. If you need to purchase or customize these equipments, if you need to purchase or customize the transformer automatic production equipment, you can contact our company and contact our business staff for purchase or customization. Thank you.
Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.
Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards. The product series include: transformer inserter, transformer EI inserter, ei type transformer automatic inserter, transformer core inserter, transformer automatic casing machine, automatic through insulation casing machine，transformer core assembly machine, Transformer core assembly rubberizing machine, (automatic core assembly + bag tape + test + wobble plate), transformer winding machine, transformer automatic winding machine,Transformer Core Automatic Winding Machine，Automatic Coil Winding Machine，Transformer Coil Winding Machine，transformer coil automatic winding machine, Coil Spindle Winding Machine，Single Spindle Winding Machine，CNC winding machine, CNC automatic winding Wire machine, CNC coil winding machine, CNC single-axis winding machine, single-axis coil winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/12 axis Automatic winding machine, 6/8/16/12 axis automatic transformer winding machine, automatic winding + wrapping tape machine, (USB charger automatic film wrapping machine), automatic rubberizing machine, semi-automatic tape conveyor, transformer Double pressing automatic rubberizing machine, transformer magnetic ring inductance double pressing automatic rubberizing machine, vacuum impregnation machine, (with single and double cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic vacuum impregnation machine), Vacuum pressure impregnation electric motor equipment，vacuum pressure impregnation process for transformers，vacuum pressure impregnation (vpi)，automatic Soldering machine and semi-automatic soldering machine (also called flip soldering machine) Turning soldering machine, transformer automatic flip soldering machine, double head soldering machine, Angular Soldering Machine，Transformer Angular Soldering Machine，desktop automatic dispensing machine, full vision COB dispensing machine, magnetic ring inductance pulling and shearing machine, magnetic ring inductance automatic foot machine, automatic Lock screw machine, double Y-axis coordinate type automatic locking screw machine, transformer potting vacuum defoaming machine, transformer copper foil backing machine, automatic taping machine，Transformer Automatic Taping Machine，automatic coil taping machine，transformer core taping machine，transformers core taping machine，computer cutting wire stripping machine, transformer comprehensive tester, automatic constant temperature oven, infrared tunnel furnace, ultraviolet High-frequency transformer peripheral automation equipment such as curing oven and baking line. The products are widely used in high and low frequency transformers, ballasts and motor factories. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.
The following is the contact information of our company. If you need to purchase or customize the equipment listed above, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Contact: Phone / WeChat: 18819603799
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.