How to control the temperature of Dongguan vacuum oven? Vacuum oven temperature control system

How to control the temperature of Dongguan vacuum oven? Vacuum oven temperature control system

The PID microcomputer automatic temperature controller can alarm and stop the power output of the machine studio by setting the internal upper and lower temperature limits, so as to prevent the products in the machine from being overheated. Loss.
1. Over-temperature protection system: The machine is equipped with an over-temperature protection system and an automatic fuse fuse system when the power is too large.
2. High temperature protection system: When the temperature is out of control due to external force, the system will automatically stop the power supply when the temperature exceeds 10 °, thus protecting the safety of your products and machines.
3. Overcurrent protection system: When the power of the whole machine exceeds the normal power due to excessive applied voltage or other reasons, the system will automatically power off and protect the industrial control components of the whole machine from damage.
Seal and vacuum display:
1. This machine adopts high sealing silicone sealing strip to ensure the sealing performance of the whole machine. At the same time, a vacuum round table is used to display the real-time vacuum in the box. The circular form position is displayed in cm pump column (minimum 0, maximum 76, negative pressure), allowing you to know the vacuum state in the box in real time.
2, 0~760mmHG leakage is less than 10mm/HG/HR. The power of the vacuum pump is 500W.
The motor speed is 1400/s.
Temperature accuracy: 1, display resolution: ± 1.0 ° C
Control function: This machine is equipped with programmable temperature controller, which adopts the electric principle of adjustable heating time and temperature to time. When a work task is completed according to the set time, the whole machine has no power output, and the buzzer alarms. Prompt the staff machine to complete the work.

The above is how to control the temperature of Dongguan vacuum oven? Vacuum oven temperature control system introduction, if you need to buy or customize vacuum oven, you need to buy or customize transformer automatic production equipment, you can contact our company, contact our business staff to buy or customize, thank you.

I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following is the introduction of our company and some automation equipment supplied by our company. If you need to purchase or customize these equipments, you need to purchase or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards. The product series include: transformer inserter, transformer EI inserter, ei type transformer automatic inserter, transformer core inserter, transformer automatic casing machine, Insulation casing automatic through machine，transformer core assembly machine, Transformer core assembly rubberizing machine, (automatic core assembly + package tape + test + wobble plate), transformer winding machine, transformer automatic winding machine,Automatic Coil Winding Machine，transformer coil winding machine, CNC winding machine, CNC automatic winding Machine, CNC coil winding machine, CNC single-axis winding machine, single-axis coil automatic winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/12 axis Automatic winding machine, 6/8/16/12 axis automatic transformer winding machine, Coil Spindle Winding Machine，Single Spindle Winding Machine，Transformer Core Automatic Winding Machine，automatic winding + wrapping tape machine, (USB charger automatic film wrapping machine), automatic rubberizing machine, semi-automatic tape conveyor, transformer Double pressing automatic rubberizing machine, transformer magnetic ring inductance double pressing automatic rubberizing machine, vacuum impregnation machine, (with single and double cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic vacuum impregnation machine),Vacuum pressure impregnation electric motor equipment，vacuum pressure impregnation process for transformers，vacuum pressure impregnation (vpi)，automatic Soldering machine and semi-automatic soldering machine (also called flip soldering machine) ，transformer automatic flip soldering machine, double head soldering machine, Angular Soldering Machine，Transformer Angular Soldering Machine，desktop automatic dispensing machine, full vision COB dispensing machine, magnetic ring inductance pulling and shearing machine, magnetic ring inductance automatic foot machine, automatic Lock screw machine, double Y-axis coordinate type automatic locking screw machine, transformer potting vacuum defoaming machine, transformer copper foil backing machine, automatic taping machine，automatic coil taping machine，Transformer Automatic Taping Machine，transformer core taping machine，transformers core taping machine，computer cutting wire stripping machine, transformer comprehensive tester, automatic constant temperature oven, infrared tunnel furnace, ultraviolet High-frequency transformer peripheral automation equipment such as curing oven and baking line. The products are widely used in high and low frequency transformers, ballasts and motor factories. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

The following is the contact information of our company. If you need to purchase or customize the above listed machinery and equipment, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Contact: Phone / WeChat: 18819603799
              QQ: 3407993243
              Email:3407993243@qq.com
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City