Vacuum Impregnation Machine PLC Controller Product Name Setting Introduction

Vacuum Impregnation Machine PLC Controller Product Name Setting Introduction

 First turn on the power to display the startup screen. After 5 seconds, the main screen will be displayed: After pressing the <Start> button or the external start button on the screen for the first time, the tray will be reset. After the reset is successful, the status window will display “Manual Control”. The manual button of the screen is manually controlled. Press the <Start> button or the external start button again. The machine will run automatically. During the reset or automatic operation, the manual button of the screen can only display the status and cannot be manually operated. Let's take a look at our Juke Industrial products. Vacuum impregnation machine PLC controller product name setting introduction.

 Press any data display on the screen to enter the parameter setting screen. , the screen appears to input Chinese (Pinyin input method), English and numbers. As a description of the current parameter set, it is convenient for the user to replace the produced product. After repeatedly pressing the upper left corner of the pop-up keyboard, <中>, <A>, <a> will be displayed in sequence, that is, Chinese Pinyin, English uppercase, and English lowercase input. The storage quantity of our HY-Z03 automatic parallel bars vacuum impregnation machine can reach 0 to 499, a total of 500 storage, the following is the vacuum impregnation machine parameter setting screen: