What is a split winding machine? What are the options for electric drive control?

What is a split winding machine? What are the options for electric drive control?

Process requirements

1. The disc winding machine is used to wind the large-volume wire on the small disc according to the set length and arrange it precisely.

2. It is required to stop the change after the length of the wire is reached, and the tension of the wire winding process is constant.

3. The traditional scheme is to use the meter to make fixed length control.

System Configuration

Large-scale unwinding motor: EM319A series power retractable line dedicated inverter, current type vector control, built-in braking unit, external braking resistor according to motor power.

Tension potentiometer: Detects the position of the tension pulley to ensure constant tension.

Small disk take-up motor: EM300A series universal vector control inverter, current type vector control, built-in braking unit, external braking resistor according to motor power. Built-in high-speed pulse input interface for fixed length control without metering.

Photoelectric sensor: Each time the wire wheel rotates, the photoelectric sensor sends a pulse signal to the SINE300 inverter high-speed pulse input interface.

Other accessories: fixed pulley, moving pulley, tension weight device, upper and lower limit travel switch, etc.

Split winding machine schematic

Split winding machine electric drive control scheme

System Features

1. The system structure is simple, no other control unit is needed, only two inverters constitute a complete system.

2. Winding machine fixed length stop control, no metering is required, saving customer cost and increasing product added value.

3. EM319A power release special open-loop vector inverter, just press the correct wiring according to the instructions to start normal operation, can automatically track the line speed of the wire, keep the tension constant.

What is the above-mentioned disk winding machine? What are the options for electric drive control? Introduction, if you need to buy or customize the disk winding machine, you need to buy or customize the transformer automatic production equipment, you can contact our company, contact our business staff to buy or customize, thank you.

I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following is the introduction of our company and some mechanical equipment supplied by our company. If you need to purchase or customize these mechanical equipment, you need to purchase or customize the transformer automatic production equipment. You can contact our company to contact our business staff for purchase or customization. Thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards. The product series include: transformer inserter, transformer EI inserter, ei type transformer automatic inserter, transformer core inserter, transformer automatic casing machine,automatic through insulation casing machine， transformer core assembly machine, Transformer core assembly rubberizing machine, (automatic core assembly + bag tape + test + wobble plate), transformer winding machine, transformer automatic winding machine, transformer coil automatic winding machine, CNC winding machine, CNC automatic Winding machine, CNC coil winding machine, CNC single-axis winding machine,Coil Spindle Winding Machine，Single Spindle Winding Machine， single-axis automatic coil winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/ 12-axis automatic winding machine, 6/8/16/12-axis automatic transformer winding machine, Transformer Core Automatic Winding Machine，automatic winding + wrapping tape machine, (USB charger automatic coating machine), automatic rubberizing machine, semi-automatic wrapping tape Machine, transformer double pressing automatic rubberizing machine, transformer magnetic ring inductance double pressing automatic rubberizing machine, Vacuum pressure impregnation electric motor equipment，vacuum pressure impregnation process for transformers，vacuum impregnation machine, (with single and double cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic vacuum impregnation machine ),vacuum pressure impregnation (vpi)， automatic soldering machine and semi-automatic soldering machine (also called flip solder) ), transformer flip soldering machine, transformer automatic flip soldering machine, Angular Soldering Machine，Transformer Angular Soldering Machine，double head soldering machine, desktop automatic dispensing machine, full vision COB dispensing machine, magnetic ring inductance pulling and shearing machine, magnetic ring inductance automatic foot machine ,Automatic locking screw machine, double Y-axis coordinate type automatic locking screw machine, transformer potting vacuum defoaming machine, transformer copper foil backing machine, computer cutting wire stripping machine,automatic taping machine，Transformer Automatic Taping Machine，automatic coil taping machine，transformer core taping machine，transformer comprehensive tester, automatic constant temperature oven, infrared tunnel furnace , UV curing oven, baking line，Transformer assembly production line，core automation production line and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency transformers, ballasts and motor manufacturers. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

The following is the contact information of our company. If you need to purchase or customize the above listed machinery and equipment, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Contact: Phone / WeChat: 18819603799
              QQ: 3407993243
              Email:3407993243@qq.com
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City