What percentage of the solvent can be recovered by the vacuum impregnation machine?
Dongguan Hanma electronic impregnation machine diagram
Parallel bar impregnation controller
Dongguan Juke Industrial's HY-Z03 double-cylinder vacuum impregnation machine adopts transformer oil forced circulation cooling, the coil adopts vacuum immersion paint, good insulation, fully sealed structure, and adapts to environmental ability; independent circulation oil passage is formed between coils, heat dissipation High efficiency, the magnetic separator coil temperature rise ≤25 °C; circulating oil cooling adopts intelligent control, the air cooler parameters are automatically adjusted with the temperature rise of the magnetic separator, the difference between the cold and hot state of the magnetic field is small, and the magnetic potential utilization rate is high. The excitation power is reduced by 20% and the coil cost is saved by 20% at the same magnetic field strength.
Vacuum heat treatment can achieve almost all the heat treatment processes that can be involved in conventional heat treatment, but the quality of heat treatment is greatly improved. Compared with the conventional heat treatment, the vacuum heat treatment can achieve no oxidation, no decarburization, no carburization, remove the phosphorous chips on the surface of the workpiece, and have the functions of degreasing and degassing, thereby achieving the effect of surface bright purification.
Dongguan Juke Industry HY-Z03 double-cylinder vacuum impregnation machine has many functions, such as recovery solvent - solvent recovery rate of more than 65%, can be reused. Improve work efficiency - the workpiece from pre-baking, vacuum pressure impregnation, lacquer to heat drying. The whole process takes only a few hours. Therefore, Dongguan Juke Industry HY-Z03 double-cylinder vacuum impregnation machine can recover more than 65% of solvent.
More Dongguan Juke Industrial Products News Please pay attention: vacuum impregnation machine
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.