The working principle and precautions of the parallel bar vacuum impregnation machine?

2019-05-21 15:36:05 HUIYUECN 1

The working principle and precautions of the parallel bar vacuum impregnation machine?

     This article mainly introduces the working principle and precautions of HY-Z03 double-cylinder vacuum impregnation machine of Dongguan Juke Industrial Transformer Automation Equipment Development Co., Ltd. First let everyone know the characteristics of vacuum impregnation machine 1. Immersion time can be set. 2 With timing alarm, motor overload protection and phase loss protection. 3. Exhaust filter recovery, with environmental protection, recycling double-effect function. The following is the working principle and precautions of the parallel bar vacuum impregnation machine:

 Working principle of double bar vacuum impregnation machine:
1. Put the object to be impregnated into the cylinder, close the cylinder head and lock it by the cylinder head locking device.
2. Vacuuming the negative pressure and holding it for a period of time; press the liquid in the liquid storage tank into the cylinder under the action of the atmosphere, and close the liquid inlet pipe after the liquid reaches a certain height.
3. (Continue) Vacuum: After a certain negative pressure is reached, the pressure is maintained.
4, balance (inhale), open the suction (call) nozzle, the air naturally enters the cylinder under the action of atmospheric pressure, so that the pressure inside the cylinder is equal to the pressure outside the cylinder.
5. When positive pressure is needed, positive pressure can be added. When positive pressure is not required, the liquid is immersed in the raw material by vacuuming. (Mainly let the liquid in the cylinder enter the object. Balance or soak the object in the cylinder)
6. Exhaust (exhale and empty), open (suck) the exhalation nozzle to make the air in the cylinder exhale. The pressure is equal to the outside of the cylinder.
7. Pressurize and drain the liquid, and press all the liquid in the cylinder by adding positive pressure. At this time, the liquid discharge port is closed (the pressure is maintained in the cylinder)
8. Exhaust again to balance the pressure inside the cylinder with the outside of the cylinder.
9. Dry, and the dry bucket in the cylinder rotates. The liquid in the impregnated object is dried by centrifugation to remove excess liquid from the impregnated object.
10. Drain and remove the object.

 Precautions for double bar vacuum impregnation machine:
1) 3, 4, 5, 6, work procedures can be returned until the impregnation of the impregnated objects in the cylinder is balanced.
2) Positive and negative pressure in the cylinder is determined according to customer requirements.
3) The positive pressure in the cylinder can reach 0.6MPa (6.12KG/CM); the negative pressure can reach 1.02×10MPa.
4) Impregnation efficiency and product quality have been greatly improved.

 The following is the Juke Industrial double cylinder automatic vacuum impregnation machine details HD picture:

 HY-Z03 double cylinder automatic vacuum impregnation machine
 HY-Z03 double cylinder automatic vacuum impregnation machine.jpg

Air filter: The compressed air which removes liquid water and liquid oil will be filtered through the filter core to remove those tiny solid particles.
Air filter.jpg

Fifteen-pin connector: Makes line connection more convenient (power switch, driver, stepper motor, control sensor)
Fifteen-pin connector.jpg

Double glass observation window: ten mm thickness tempered glass (with sealing ring)
Double glass observation window.jpg

Stainless steel pressure gauge: used for corrosive gas environment, can detect the pressure or vacuum of corrosive medium (range 0.01 to 0.1MPa)
Stainless steel pressure gauge.jpg

LED low-power bulb: long lamp life, low standby power, energy saving and environmental protection
LED low-power bulb.jpg

 Bulb cable: three connectors for easy connection
 Bulb cable.jpg

Chint brand relay: Zhejiang Zhengtai Electric, China's first A-share listed company with low-voltage electrical appliances as its main business (big brands are trustworthy)
Chint brand relay:.jpg

Impregnation machine controller: All Chinese PLC control, can be preset a variety of impregnation modes, intelligent vacuum pumping, to achieve no bubble 凡立水, impregnation effect
Impregnation machine controller.jpg

HY-Z03 double cylinder automatic vacuum impregnation machine
HY-Z03 double cylinder automatic vacuum impregnation machine.jpg

Dongguan Hanma impregnation machine site
Dongguan Hanma impregnation machine site.jpg

Dongguan Hanma electronic impregnation machine diagram
Dongguan Hanma electronic impregnation machine diagram.jpg

Grey double cylinder vacuum impregnation machine
Grey double cylinder vacuum impregnation machine.jpg

Gray impregnation machine controller
Gray impregnation machine controller.jpg

 Two-cylinder impregnation machine shipped in Sichuan map
 Two-cylinder impregnation machine shipped in Sichuan map.jpg

Two-cylinder impregnation machine shipped in Sichuan Figure 1
Two-cylinder impregnation machine shipped in Sichuan Figure 1.jpg

Double cylinder impregnation machine controller
Double cylinder impregnation machine controller.jpg

Impregnation machine controller parameter setting
Impregnation machine controller parameter setting.jpg

More Juke vacuum impregnation machine series pictures, Juke Xiaobian will continue to update, please stay tuned.


The above is the working principle and precautions of the parallel bar vacuum impregnation machine. If you need to buy or customize the parallel bar vacuum impregnation machine, you can contact our business staff to purchase or customize, thank you.


I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following are the company introduction of our company and some transformer automatic production equipment supplied by our company. If you need to purchase or customize the transformer automatic production equipment, you can contact our business staff to purchase or customize, thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards, and its product series include: transformer inserting machine, ei type transformer inserting machine, transformer EI inserting machine, transformer core inserting machine, transformer automatic casing machine, transformer core assembly machine, transformer Magnetic core assembly rubberizing machine, (automatic magnetic core assembly + wrapping tape + test + wobble plate), transformer automatic winding machine, CNC winding machine, CNC coil winding machine, single-axis CNC winding machine, single-axis coil Winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/12-axis automatic winding machine, 6/8/16/12-axis automatic transformer winding machine ,Automatic winding + tape machine, (USB charger automatic film machine), automatic rubberizing machine, semi-automatic tape machine, transformer magnetic ring inductance double pressure automatic rubberizing machine, vacuum impregnation machine, (single and double Cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic vacuum impregnation machine), transformer flip soldering machine, double head soldering machine, automatic soldering machine and semi-automatic soldering machine (also called flip soldering machine), full visual COB Dispenser, transformer integrated tester, computer cutting and stripping , Automatic constant temperature oven, magnetic ring inductors, shearing and forming machine, magnetic core inductor automatic foot machine, double Y axis coordinate automatic locking screw machine, desktop automatic dispensing machine, transformer filling vacuum defoaming machine, transformer automatic Copper foil adhesive machine, infrared tunnel furnace, ultraviolet curing oven, baking line and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency transformers, ballasts and motor manufacturers. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

Here is the contact information of our business staff. If you want to customize or purchase the products listed above, you need to buy or customize the transformer automatic production equipment, you can contact our business staff to buy or customize, thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Phone / WeChat: 18819603799
QQ: 3407993243
Email:3407993243@qq.com
Manufacturer Tel: 0769-89870552
Company website: http://tc.huiyuecn.com
If you need to buy or customize transformer automation production equipment, you can contact our business staff to purchase or customize, thank you.

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM