13m transformer special tunnel furnace overall structure
1. The tunnelfurnace is divided into 5 sections for heating, each section is 2000mm,and each section is independently temperature controlled.
2. The tunnel furnace is folded into a 1.2mm cold-rolled plate shell.
3. The tunnel furnace is folded into a 1.2mm stainless steel mirror panel.
4. The main beam of the tunnel furnace body is made by bending 2.0mm hot plate.
5. The tunnel body tripod is formed by 50*50*1.5mm iron square pass welding.
6. automatic coil taping machine The bottom is equipped with a leveling cup.
7.The heat preservation uses aluminum silicate and foamed silicone tokeep heat; the thickness of the insulation layer is 100mm.
8. The surface of the tunnel furnace is painted (the color is computer white).
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.