Vacuum impregnation machine PLC controller parameter setting screen

Vacuum impregnation machine PLC controller parameter setting screen

 Dongguan Juke Industrial HY-Z03 Automatic Vacuum Impregnation Machine, suitable for high frequency transformer EE series, EP series, ER series, ETD series, EPC series, RM series, EFD series, PQ series, low frequency transformer series and filter series, applicable Widely, then Miss Juke officially introduces the vacuum controller's PLC controller parameter setting screen:

 2, parameter setting
2.1 Under the initial screen, click to enter the system and enter the following interface.

2.2 Under this interface, click on the parameter setting to automatically enter the parameter setting interface.

 2.3 parameter settings:
One vacuum (seconds): the first time the vacuum is turned on
Defoaming time (seconds): exhaust time when the product is controlled
Defoaming interval (seconds): Exhaust pause interval when the product is controlled
Defoaming times (times): times of defoaming time and interval
Impregnation time (seconds): time during which the product is impregnated under vacuum
Dipping time (seconds): time to replenish vacuum during impregnation
Secondary vacuum (seconds): vacuum time drawn when the product is dripped
Drying time (seconds): the time the product is dripped under vacuum
Pre-dip height (mm): Defoaming action is performed from the pre-dip height to the immersion height, and the defoaming action can be performed when the product is approached, thereby reducing the generation of bubbles when the product is released.
Oil immersion height (mm): covers the height position where the product needs to be immersed
Dip interval (times): venting during the immersion time, fill interval
Leaching time (seconds): During the impregnation process, the exhaust time allows the insulating paint to penetrate into the interior of the product.
 
2.4 The parameters set here can be directly exited and saved automatically. The parameter number can be set at the top of the parameter and named for the current parameter number.