Electronic industry dip coating machine transformer vacuum impregnation machine insulation paint double cylinder soaking machine
Electronic industry dip paint machine transformer vacuum impregnation machine insulation paint double cylinder soaking machine electronic industry dip paint machine transformer vacuum impregnation machine insulation paint double cylinder soaking machine. PLC controller control, vacuum impregnation machine can preset a variety of impregnation mode, with timely, appropriate elimination of bubble function; check the drying regularly to confirm whether the condition of the drying oven is normal. Clean and maintain the equipment before going to work every day. If it is necessary to stop production, you need to turn off the power. The top cover is supported by a 50KG hydraulic rod. The top cover is sealed with silicone rubber and the cover is quickly clamped. Turn the power supply from OFF to ON, check whether the temperature and time control parts are normal. Use the stepper motor to drive the precision ball screw to move the sub-tank lift type, and preset the lifting height (the maximum stroke of the sub-slot is 60mm; the displacement accuracy is ±0.05) Mm). The responsible person is required to implement the maintenance of the machine and make a record (with the “Daily Maintenance Checklist for Equipment”). The screw jack has high bearing capacity and high control precision. The PIN will not stick to the varnish, and there is no need for secondary tin plating.
Electronic industry dip paint machine transformer vacuum impregnation machine insulation paint double cylinder soaking machine, air venting valve is arranged in the upper part of the storage tank, and paint venting valve is arranged in the lower part of the storage tank; because the storage tank and the dipping paint drying cylinder Integrated in a cabinet, you can omit some unnecessary parts. Automatic switch box cover, secondary automatic vacuuming, saving time and effort, environmental protection, energy saving, can achieve single-person multi-machine operation. Correspondingly, the production process is simplified, the control device is simplified, the installation and maintenance are also convenient, and the manufacturing cost is greatly reduced. The standard impregnation machine is approximately 80mm high (custom height can be customized according to customer requirements). The product that is ready for internal immersion is loaded into the oven. The groove is made entirely of 10MM steel plate. The double glass viewing window allows you to view the immersion at any time. A vacuum release valve, a vacuum gauge and a thermocouple are also arranged on the dipping cylinder, and a heating plate and a heat insulating layer are further disposed on the side wall of the dipping cylinder.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.