Working principle of impregnation tank in vacuum impregnation machine

Working principle of impregnation tank in vacuum impregnation machine

  The vacuum impregnation machine has a single cylinder and a double cylinder. The twin cylinders work faster than the single cylinders. The impregnation tank of our vacuum impregnation machine can be customized according to the customer's demand. The working principle of the impregnation tank in the vacuum impregnation machine is:

   Resin filling of various metal film capacitors, electrolytic capacitors, vacuum degassing process for medium/small resin crafts, and vacuum degassing process for various plastic PU raw materials. The main function and working principle of the vacuum impregnation machine are as follows: : the object to be impregnated is placed in the cylinder, the cylinder head is closed and locked by the cylinder head locking device. Vacuuming the negative pressure and holding it for a period of time; press the liquid in the liquid storage tank into the cylinder under the action of the atmosphere, and close the liquid inlet pipe after the liquid reaches a certain height. (Continued) Vacuum: After a certain negative pressure is reached, the pressure is maintained. Balance (inhale), open the suction (call) nozzle, the air naturally enters the cylinder under the action of atmospheric pressure, so that the pressure inside the cylinder is equal to the pressure outside the cylinder.
   

  For example, positive pressure is applied (mainly to make the liquid in the cylinder enter the object. The liquid in the cylinder is evenly immersed or soaked), exhaust (exhale and vent), and open (suck) the exhalation nozzle to exhale the air in the cylinder. The pressure is equal to the outside of the cylinder. Vacuum impregnation machine When the air pressure reaches a certain value, the impregnation tank must be turned off.

Old single cylinder vacuum impregnation machine