Fully automatic vacuum impregnation machine immersion paint parameter setting

Fully automatic vacuum impregnation machine immersion paint parameter setting

   The automatic vacuum impregnation machine is controlled by the PLC controller. As long as the impregnation parameters of the product are saved on the controller, the product can be repeatedly operated. how to set the parameters of the vacuum impregnation machine dipping paint?Here is a detailed explanation from Juke Industries.

   Other parameters are set according to the user's needs. <Immersion Height> If the setting exceeds the actual mechanical stroke, it will be automatically modified to the maximum mechanical stroke. If the stepper motor makes an abnormal howling sound and the actual position of the tray does not match the position displayed on the main screen, please turn down the <Tray Speed> (preferably between 1.0-30.0mm/S) and turn off the power. After a minute, power cycle again. <Immersion Vacuum> and <Secondary Vacuum> can only be set to a negative value between -100 and 0. Press the <+/-> key on the pop-up keyboard to switch to a negative input before entering the value. If the “defoaming” function is not required, set both <Defoaming time> and <Defoaming interval> to 0. If <Defoaming time> and <Defoaming interval> are set, the oil immersion process in automatic operation The center will open and close the intake valve at the set value timing.

Automatic single cylinder vacuum impregnation machine operation video address: http://www.huiyuecn.com/info-353.html

Automatic double cylinder vacuum impregnation machine operation video address: http://www.huiyuecn.com/info-356.html

 Juke automatic vacuum impregnation machine physical map: