Should the tunnel oven drying line be durable if it is maintained?

Should the tunnel oven drying line be durable if it is maintained?

   Our company Juke Industrial Co., Ltd. selects domestic new thermal insulation materials, strong thermal insulation, vacuum-gold-plated infrared reinforced membrane on the outer surface, good temperature resistance, and can work continuously for more than 6,000 hours. Fully automatic temperature control, saving 2-5 times than traditional vertical oven, saving more than 30%, and high working efficiency. The following is a brief introduction by Juke Xiaobian about how to maintain the tunnel oven drying line and then the tunnel oven drying line is durable.

1. Regularly check whether the lamp is not bright. Detection method: During the heating process, check whether the current of the ammeter is normal. If the lamp is not properly observed, it must be inspected.

2. Regularly check whether the drive chain and stainless steel conveying device are in good condition, and replace the gear oil of the reducer regularly (except for the 1/3 month gear reducer).

3. The side sealing plate of the machine adopts an over-tight fit to prevent unrelated personnel from storing the sundries in the machine.

4. When moving the machine, the correct operation method: adjust the foot cup, let the foot cup go off the ground more than 50mm, then move the machine, adjust the foot cup after positioning to keep the equipment level, let the wheel leave the ground about 10mm.

5, repair and maintenance of the machine must be opened when the machine part of the furnace, the correct method of operation:

(1) There must be more than three personnel, and two strong support rods are prepared.

(2) Open the handle bar, two people will open the furnace body upwards, the third person will support the support rod, one end is supported on the furnace body, and one end is supported on the conveying bracket.

(3) Carry out related maintenance and repair, and clean debris and dust after completion.

(4) When laying down, the two prop up the furnace body, one person removes the support rod, and then slowly put down the furnace body.

(5) Only one furnace is treated at a time to ensure safety and OK after completion.

(6) Wipe the lamp once every six months to ensure the baking effect.


Our company Juke Industrial tunnel furnace drying line after-sales quality commitment: free one year warranty, lifelong company service! Our aim: the pursuit of excellence, the future of quality casting products!

For detailed parameters of Juke tunnel furnace drying line, please click: tunnel furnace drying line

Juke Industrial Tunnel Furnace Drying Line Physical Map:

We are here at Dongguan Juke Industrial Development Co., Ltd. Our company is a transformer automation equipment supplier. The following is the introduction of our company and the automation equipment produced by our company. If you need to buy or customize the product, please contact us, thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.

Juke Industry adheres to European standards. The product series include: transformer EI inserter, transformer automatic inserter, transformer core inserter, transformer automatic casing machine, automatic core assembly machine, (automatic core) Assembly package tape test swing plate), CNC winding machine, single-axis winding machine, 12-axis automatic winding machine,Transformer Core Automatic Winding Machine， automatic winding tape machine, (USB charger automatic film wrapping machine), automatic rubberizing machine, Semi-automatic tape dispenser, vacuum impregnation machine, (different single and double cylinders), transformer flip soldering machine, automatic soldering machine and semi-automatic soldering machine (also called flip soldering machine), automatic taping machine，automatic coil taping machine，Tunnel Furnace Drying Line ，infrared tunnel furnace, UV curing oven, baking Line and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency transformers, ballasts and motor manufacturers. In order to meet the needs of the market, in 2008, in Yixiu District, Anqing City, Anhui Province, a group of professional and technical personnel to provide quality services to customers.

If you need to customize or purchase the products listed above, you can contact our business staff. The following is the contact information of our business staff:
Contact information:
Phone: 18819603799
QQ: 3407993243
WeChat: 18819603799
Email:3407993243@qq.com
Manufacturer Tel: 0769-89870552
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City