HY-Z03 automatic double cylinder vacuum impregnation machine 2015 new controller setting

HY-Z03 automatic double cylinder vacuum impregnation machine 2015 new controller setting

     Starting from Juke, the company introduces high-precision processing equipment and perfect production technology at home and abroad, strives for survival by quality, develops by quality, strives for efficiency by quality, and establishes the quality of enterprise survival. In October, our HY-Z03 automatic two-cylinder vacuum impregnation controller system was updated to 0-500 products. The following is a brief introduction to the vacuum impregnation machine parameter settings.

1. Under the initial screen, click to enter the system and enter the following interface.

2. Under this interface, click the parameter setting to enter the parameter setting interface automatically.

3, parameter setting: one vacuum (seconds): the first time to start vacuuming time
Defoaming time (seconds): exhaust time when the product is controlled
Defoaming interval (seconds): Exhaust pause interval when the product is controlled
Defoaming times (times): times of defoaming time and interval
Impregnation time (seconds): time during which the product is impregnated under vacuum
Dip time (seconds): time to replenish vacuum during impregnation
Secondary vacuum (seconds): vacuum time drawn when the product is dripped
Drying time (seconds): the time the product is dripped under vacuum
Pre-dip height (mm): Defoaming action is performed from the pre-dip height to the immersion height, and the defoaming action can be performed when the product is approached, thereby reducing the generation of bubbles when the product is released.
Oil immersion height (mm): covers the height position where the product needs to be immersed
Dip interval (times): venting during the immersion time, fill interval
Leaching time (seconds): During the impregnation process, the exhaust time allows the insulating paint to penetrate into the interior of the product.

4. The parameters set here can be directly exited and saved automatically. The parameter number can be set at the top of the parameter and named for the current parameter number.

Juke 2015 new automatic two-cylinder vacuum impregnation machine customer site operation video: http://www.huiyuecn.com/info-480.html

HY-Z03 automatic double cylinder vacuum impregnation machine physical map: