Transformer automatic impregnation machine storage 500 kinds of product parameter setting tutorial

Transformer automatic impregnation machine storage 500 kinds of product parameter setting tutorial
   
Our Dongguan Juke Industrial automatic vacuum impregnation machine introduces high-precision processing equipment and perfect production process at home and abroad, and establishes the enterprise property of surviving by quality, developing by quality and benefiting by quality. At present, the PLC controller of the two-cylinder automatic vacuum impregnation machine can store 500 kinds of products. The following is a detailed explanation of how the parameters of the two-cylinder automatic vacuum impregnation machine are set by Juke Xiaobian.

Juke two-cylinder automatic vacuum impregnation machine actual operation video: http://www.huiyuecn.com/info-480.html
1.Under the initial screen, click into the Vacuum pressure impregnation electric motor equipment system and enter the following interface.

 2. Under this interface, click the parameter setting to enter the parameter setting interface automatically.

 3, Vacuum pressure impregnation electric motor equipment parameter setting: one vacuum (seconds): the first time to start vacuuming time
(1) Defoaming time (seconds): Exhaust time when the product is controlled
(2) Defoaming interval (seconds): Exhaust pause interval when the product is controlled
(3) Number of defoaming times (times): number of times of defoaming time and interval
(4) Impregnation time (seconds): time during which the product is impregnated under vacuum
(5) Dipping time (seconds): time to replenish vacuum during impregnation
(6) Secondary vacuum (seconds): vacuum time drawn when the product is dripped
(7) Drip time (seconds): time when the product is dripped under vacuum
(8) Pre-dip height (mm): Defoaming action is performed from the pre-dip height to the immersion height, and the defoaming action can be performed when the product is approached, thereby reducing the generation of bubbles when the product is released.
(9) Oil immersion height (mm): covering the height position where the product needs to be immersed
(10) Dip interval (times): venting during the immersion time, the interval of filling
(11) Leaching time (seconds): During the impregnation process, the exhaust time allows the insulating paint to penetrate into the interior of the product.

4. The parameters set here can be directly exited and saved automatically. The parameter number can be set at the top of the parameter and named for the current parameter number.