The difference between transformer automatic soldering machine and ordinary soldering operation
HY-H03 transformer automatic soldering machine: SMT transformer and general transformer inductance and other high-precision soldering electronic parts use and general solder products. A variety of simulated human hand movement curves, Transformer Angular Soldering Machine and 360 degree arbitrarily set the flip angle function, can weld SMT and PIN TYPE all kinds of vertical and other products. What are the normal steps for normal transformer soldering?
Ordinary soldering machine soldering operation steps:
1. Place the product neatly and put the pins together.
2. A row of products is clamped with a solder clip, and the number of products can be adjusted according to the size and operability of the product.
3. Put the flux on the Pin foot to avoid the flux on the coil.
4. Use a mica sheet to scrape the tin surface. The tin surface solder is kept clean.
5. Immersion tin: When the vertical Bobbin is immersed in tin, the foot is vertically inserted into the tin bath, and the immersion tin depth is the same as the tin surface. ?
1. The number of continuous dip soldering is not more than 2 times. It is necessary to ensure the cooling time of the Pin foot and the product during the repair welding, and the previous dip soldering
The interval is more than 1 minute, so as to avoid excessive corrosion of copper wire and Bobbin deformation and insulation cracking.
2, master the time of immersion tin, generally completed within 4 seconds, to prevent the skeleton from scalding, deformation, hot tape, take it vertically when taken out.
3, Φ0.2 (including 0.2) below and paint line, stripping triple line, dip soldering time 1~3 seconds; Φ0.2~0.7 (including 0.7), 2~4 seconds; Φ0.7 or more wire diameter, 3~5 seconds.
If you want to operate the automatic soldering machine of our company, please call our Dongguan Juke Industrial Consulting! ! !
HY-H03 transformer automatic soldering machine physical map:
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.