Fully automatic impregnation machine 8 major matters needing attention

The automatic impregnation machine needs correct operation and maintenance to extend the life of the impregnation machine. What should be paid attention to in the automatic impregnation machine? Huiyue Technology Li S takes everyone to know about youvacuum impregnation machine

1. Fireworks are strictly forbidden in the dip-coating workshop. The fire-fighting equipment must be complete, and the carbon dioxide fire extinguisher should be prepared. The operator must have fire-fighting knowledge.
2. Whether the situation is normal during the shift, whether the insulating paint meets the requirements, whether the quantity is sufficient, and whether the total amount of insulating paint is too high.
3. Before using the equipment to open the cover, the smell of the solvent in the workshop is very small. If the smell of the solvent in the workshop is found to be very strong, the equipment should be inspected for leakage or abnormality and excluded.
4. The viscosity of the insulating paint should be checked regularly. When adding insulating varnish or solvent, the open flame device should be stopped in the workshop to avoid danger.
5. The dip paint cylinder is the key equipment of this machine. Attention must be paid to the height of the dip coating during operation to avoid affecting the vacuum pump. If the dip paint level exceeds the height, close the paint valve, open the dip paint cylinder cover, and immediately return the paint. If it is sure to be cleaned before use.
6. The vacuum pump should be regularly maintained. When the vacuum does not meet the requirements, all vacuum systems should be inspected carefully. The problems should be repaired and recorded in time. When the solvent used in the insulating paint exceeds 30%, the vacuum pump should be changed. frequency. If the vacuum system has no leakage and the vacuum does not meet the requirements, the vacuum pump oil should be replaced.