How to judge whether the winding machine is not normal, can you judge the sound?

2018-12-27 11:11:41 HUIYUECN 0

How to judge whether the winding machine is not normal, can you judge the sound?
In a person who will operate the winding machine, CNC Winding Machine the sound can be judged by what reason. Under normal circumstances, the winding machine will not make strange sounds. Unless there is any damage, it will make strange sounds. What kind of foreign sound will it cause?

      In the winding process of the automatic winding machine, you will hear a very subtle "Hang En" sound, which is the sound of the motor rotation; when the shaft slides, you will hear the "scratch" sound of the sliding of the guide rail; occasionally, the air pump will release the gas. The sound is generally pleasing to the ear, and there is no harsh sound. Experienced people can use the sound to judge whether the winding machine is abnormal.
      If the screw is not tightened or the part needs to be screwed but the screw is not installed, the inertial impact force generated when the winding machine parts are running may cause the parts to loosen. In severe cases, the impact will occur, so the impact sound must be turned off. Machine, quickly check the equipment; if the base of the winding machine is not heavy enough, or the floor is not flat, the winding machine will shake when it is in operation, there will be a "beep" sound; the bearing is insufficient in lubricating oil, winding The sound of "wire and wire" is heard in the bearing housing; the steel ball in the bearing is damaged, and there is a "click" sound during operation; the rotor parts are loose, such as loosening of the weight screw on the inner blade of the cage rotor, or the rotor shaft is loose, The winding machine produces a knocking sound; if the shaft is bent or the bearing is worn, the winding machine will also generate vibration and uneven friction sound; the wire paint skin will cause the intersection of the two wires, and there will be a "sweet" sound, but at that time Causes a short circuit, which can cause serious damage to electronic components, so the usual inspection and maintenance is more important than remediation!

  Please understand the above situation in detail, this ocean will give you a very good help.

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.