CNC winding machine winding input operation tutorial

CNC winding machine winding input operation tutorial

Our company's CNC winding machine's spindle forward and reverse speed 3000-5000RPM (optional), in the use of CNC winding machine winding money input operation must be entered according to the correct operation mode, the following detailed explanation Under the CNC winding machine winding input operation tutorial.

When the CNC winding machine is in the standby state, press [Step Setting] [Input], CNC Winding Machine the step display will display the starting step number, the starting point indicator will light up, and the data display will show the starting point. The key and [input] are used to change the setting. This setting fails to determine the exact position of the winding point. Therefore, press [Jump] or [Rewind] to set the teaching position. At this time, the cable lever follows the movement. Pulling the enamel enameled wire on the guide plate of the cable guide plate can help determine whether the cable arranging plate reaches the winding point. If the entanglement reaches the exact position, press [Input] and the data display shows the width. Continue. Edit the width, the width can be changed by the number keys and [input], you can also press [jump] or [deselect] to set the teaching position. At this time, the cable rod follows the movement and controls. The device will calculate the current position and the winding point to obtain the width and automatically determine the direction of the cable. After pressing [INPUT], the data display shows the wire diameter, continue to edit the wire diameter, and then cycle to the back item.