What kind of iron core is used for the transformer in the iron core automatic rubber laminating machine?
Huiyue Technology Iron Core Automatic Encapsulation Machine This can be used for any vertical and horizontal transformers, and it is easy and quick to change the varieties. This is a multi-ocean operation. What kind of iron core is used for the transformer in the iron core automatic rubber laminating machine?
transformers automatic taping machine Used as the core of the transformer, the 0.35mm thick cold-rolled silicon steel sheet is used in the same way. According to the size of the required core, it is cut into long pieces and then overlapped into a "day" shape or a "mouth" shape. In theory, if the eddy current is reduced, the thinner the thickness of the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss, reduces the temperature rise, but also saves the material of the silicon steel sheet. But in fact, when making the iron core of the silicon steel sheet. It is not only based on the above-mentioned favorable factors of the kneading, because the production of iron cores by Nayang greatly increases the working hours and reduces the effective cross-section of the iron core. Therefore, when using a silicon steel sheet to make a transformer core, it is necessary to weigh the pros and cons from the specific situation and choose the best size.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.