The transformer of the transformer encapsulation machine is to be made according to electromagnetic induction.
2018-12-19 10:55:02
HUIYUECN
0
The transformer of the transformer encapsulation machine is to be made according to electromagnetic induction.
Our Huiyue Technology transformers are available in the inner ring of the tape: 34mm and 77mm can be applied. The following transformers are explained by Huiyue Xiaobian and the transformer manufacturer. The transformer of the transformer wrapping machine is to follow the electromagnetic induction. Production.
On the closed core column,Transformer automatic through insulation there are two windings, one primary winding and one secondary winding. When the original winding is falsely connected to the AC power supply voltage, the original winding flow has an alternating current, and the magnetic potential is established. Under the action of the iron core, an alternating main magnetic flux is generated. The main magnetic flux passes through the core at the same time, and the secondary winding is closed. Because the electromagnetic induction acts separately, the secondary winding generates an induced electromotive force. As for why It can be boosted, and it will be pressed.. Then it needs to be explained by Lenz's law. The magnetic flux generated by the induced current always hinders the change of the circular magnetic flux, and the magnetic flux that induces the current when the original magnetic flux increases. Contrary to the original magnetic flux, that is, the induced magnetic flux generated by the secondary winding is opposite to the main magnetic flux generated by the primary winding, so the secondary winding has a low-level alternating voltage, so the iron core is the magnetic circuit portion of the transformer. The winding is the circuit part of the transformer.
On the closed core column,Transformer automatic through insulation there are two windings, one primary winding and one secondary winding. When the original winding is falsely connected to the AC power supply voltage, the original winding flow has an alternating current, and the magnetic potential is established. Under the action of the iron core, an alternating main magnetic flux is generated. The main magnetic flux passes through the core at the same time, and the secondary winding is closed. Because the electromagnetic induction acts separately, the secondary winding generates an induced electromotive force. As for why It can be boosted, and it will be pressed.. Then it needs to be explained by Lenz's law. The magnetic flux generated by the induced current always hinders the change of the circular magnetic flux, and the magnetic flux that induces the current when the original magnetic flux increases. Contrary to the original magnetic flux, that is, the induced magnetic flux generated by the secondary winding is opposite to the main magnetic flux generated by the primary winding, so the secondary winding has a low-level alternating voltage, so the iron core is the magnetic circuit portion of the transformer. The winding is the circuit part of the transformer.
Follow Us
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.
Industry News
New Products
Contact Details
- No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
- +86-769-89870552
- MR.GUAN@HUIYUECN.COM