Advantages of the primary winding method of the CNC winding machine secondary clamp

Huiyue HY-R06 CNC winding machine spindle forward and reverse speed 3000-5000RPM (optional); wire diameter setting: 0-0.99mm; cable distance: 0-100mm. Let's take a look at the benefits of the primary winding method of the secondary winding of the CNC winding machine.
It CNC Winding Machine can effectively reduce the temperature rise caused by copper loss: since the output is low voltage and large current, the copper loss is sensitive to the length of the wire, and the Ns/2 around the inner side can effectively reduce the length of the wire, thereby reducing the Ns/2 winding. Copper damage and fever. Although the Ns/2 of the outer layer is relatively long, it is basically on the outer layer of the transformer, and the heat is good, so the temperature is not too high.

2. It can reduce the high frequency interference of the primary coupling to the transformer core. Since the primary is far away from the core and the secondary voltage is low, the high frequency interference caused is small.