Dongguan Huiyue manual vacuum impregnation machine panel operation instructions

2018-12-12 10:11:02 HUIYUECN 2

Dongguan Huiyue Technology Manual Vacuum Immersion Machine is capable of setting the impregnation time. It also has timing alarm, motor overload protection and phase loss protection. The following is a detailed explanation of the operating instructions of the Dongguan Huiyue manual vacuum impregnation machine panel.

1.vacuum impregnation machine Power button: Turn on the power and the device runs.
2. Start button: Start the action button, click this button once, and the device runs according to the program.
3. Stop button: Stop the action button, click this button once, the vacuum pump stops running, press the device again to continue running.
4. Time relay (left and right): set the vacuum immersion time, and alarm when the time arrives.
5, spotlight switch (left and right): used for spotlight on and off selection.
6. Air source switch: The sliding valve is used to control the air source on and off. (above the cylinder head)

7. Liquid switch: The sliding valve is used to control the liquid on and off. (under the cylinder head)

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.