Explain the two major issues of vacuum impregnation machine attention and maintenance

2018-12-10 09:43:24 HUIYUECN 0

Our Dongguan Huiyue Technology Vacuum Impregnation Machine can be customized according to the actual needs of customers. Our standard vacuum impregnation machine is equipped with dip tank size: 700*640*300mm+ inner tank 660*500*80mm; impregnation tray: 410*380mm; whole machine size :900*700*1400mm+400*250*300mm. What should you pay attention to when using a vacuum impregnator? How to maintain the maintenance? The following is a brief introduction by Hui Yue Xiaobian.

壹, vacuum impregnation machine precautions

1. In case of emergency, please press the “Emergency Stop” button immediately and notify the site administrator Automatic Vacuum Impregnation Machine and device administrator immediately after turning off the power.

2. It is strictly forbidden to play around the dip lacquering machine. The impregnation machine should be kept off when not in use or off work.

Second, vacuum impregnation machine maintenance matters

1. Should be at any time. . Brush the dipping plate to ensure that the dipping plate is not sticky, every day. . Clean the support bars to avoid affecting the quality of the dipping paint.

2. Every day. . Scrub the dipping machine casing, weekly. . Clean the mother tank and keep the tank free of debris.

3. Ensure that the bottom of the impregnation machine is clean and free of debris so as not to affect the gas path.

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.