Flip soldering machine solder control device

Flip soldering machine solder control device

When the flip soldering machine edits the solder material, the Xenon lamp lights up, indicating that the solder material is being edited. The following is a brief introduction by Hui Yue Xiaobian to the soldering control device of the Dongguan Huiyue Technology Turning Soldering Machine.

1. Angular Soldering MachinePre-hot spot: the position of the soldering rod at the first point (from the origin), the setting range [0~999.99] mm.
2. Soldering point: the second position of the soldering rod (from the origin), the setting range is [0~999.99]mm.
3, solder detachment: the third position of the soldering rod (from the origin), the setting range [0~999.99] mm.
4, preheating detachment: the fourth position of the soldering rod (from the origin), the setting range [0~999.99] mm.
5. Warm-up time: waiting time after the first position of the soldering rod arrives, the setting range is [0~999.99]S.
6. Soldering time: Waiting time after the second position of the soldering rod arrives, the setting range is [0~999.99]S.
7. Preheating speed: The speed during preheating and preheating, setting range [0~99%].
8. Solder speed: The speed of solder and solder detachment [0~99%].
9. Rotation angle: set the angle to be rotated, and set the range [0~999.99] degrees.