Automatic soldering machine production control operation instructions

2018-12-06 10:09:45 HUIYUECN 0

Automatic soldering machine production control operation instructions

Automatic soldering machine production control operation instructions

After the controller of the Huiyue automatic soldering machine is turned on, the output display shows the production quantity. When the operation is completed, the production quantity is automatically accumulated and accumulated every time from the initial step to the end step.

Production preset
 Angular Soldering Machine  In the standby mode, press {Production Setting 0-99999 Input} to complete the production preset. When the production quantity has reached the output preset value, the light will be on when it is completed; the setting range [0~99999].

Production reduction
  In the standby or pause state, press and hold the 壹 button for two seconds to reduce the cumulative output in the current production display.

Yield zero

In the standby or pause state, press and hold the zero button for two seconds to zero the output of the current output display.

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM