HY-H02 flip soldering machine control device features

HY-H02 flip soldering machine control device features

HY-H02 flip type soldering machine adopts single-chip microprocessor design, which has stronger function, smaller volume and strong anti-interference ability. The memory uses FLASH ROM, the capacity is ah, can store 1000 steps of solder information, each step can be set to 9 kinds of solder data, 5 kinds of function selection, the solder data will not be lost after the power is cut.

1. It Angular Soldering Machine can change the operation and operation mode for different models and use occasions, and the scope of application is wider.
2. The operation and operation mode can be changed for different models and occasions, and the scope of use is wider.
3. The soldering shaft provides 99-position positioning speed selection.
4, the welding shaft displacement unit has a wide range of settings, suitable for all types of screw.
5. The group edit password is set to prevent the setting data from being arbitrarily changed.
6, strong compatibility, can directly replace the same type of controller.

7, the power supply can be divided into AC 100 ~ 120V and 220V ~ 240V models are available.