HY-Z02 single cylinder automatic impregnation machine automatic operation setting

HY-Z02 single cylinder automatic impregnation machine automatic operation setting

HY-Z02 single cylinder automatic impregnation machine automatic operation setting

  Huiyue Technology HY-Z02 single-cylinder automatic impregnation machine can use manual operation and fully automatic operation mode. How should we set the operation when we run the fully automatic operation mode? Let's talk about it with Huiyue Xiaobian.

 

HY-Z02 Single-cylinder automatic impregnation machine automatic operation setting introduction:

1, automatically run the step interface:
2. When the rising value is too large vacuum impregnation machine in the automatic running, the motor will run to the upper limit of 125, then the lower step will be automatically run, and the normal running action, if it needs to stop, press the stop button to reset.

3. After switching to the automatic interface, press the start button, the startup process starts, the automatic screen displays the current action flow, and the current running steps.

4. In the automatic process, the current recipe serial number, recipe name, motor setting position and current position are displayed, as well as the set time and current timing when each step is executed, and the name of the current step executed at the same time also flashes. If you want to skip one of the steps, you can set the time of the step to 0. After the automatic process ends, the buzzer will alarm and the upper left window will display the process end information. The buzzer automatically turns off when the beep time arrives.