Inverted solder setting information introduction

Inverted solder setting information introduction

When the flip solderingmachine of our company edits the soldering materials, the Xenon lamplights up, indicating that the soldering information is being edited.
Pre-hotspot: the position of the soldering rod at the first point (from the origin), the setting range [0~999.99] mm.

Soldering point: the second position of the soldering rod (from the origin), the setting range [0~999.99]mm.

Solder detachment: the third position of the soldering rod (from the origin), the setting range [0~999.99]mm.

Preheating detachment: the fourth position of the soldering rod (from the origin), the setting range [0~999.99]mm.

Warm-up time: waiting time after the first position of the soldering rod arrives, the setting range is [0~999.99]S.

Soldering time: waiting time after the second position of the soldering rod arrives, the setting range is [0~999.99]S.

Preheating speed: speed during preheating and preheating, setting range [0~99%].

Solder speed: The speed at which solder and solder are detached [0~99%].

Transformer Angular Soldering Machine Rotation angle: Set the angle to be rotated, and set the range [0~999.99] degrees.