Automatic soldering machine solder data input setting
OurDongguan Huiyue Technology automatic soldering machine is equipped withvibrating plate, which can operate more than one person, and theefficiency can be increased by 100%. Today, there is Huiyue Li S to introduce the soldering data input settings of the automatic soldering machine.
When editing the solder material, the Xenon lamp lights up, indicating that the solder material is being edited.
1.Angular Soldering Machine Pre-hot spot: the position of the soldering rod at the first point (from the origin), the setting range [0~999.99] mm.
2. Soldering point: the second position of the soldering rod (from the origin), the setting range is [0~999.99]mm.
3, solder detachment: the third position of the soldering rod (from the origin), the setting range [0~999.99] mm.
4, preheating detachment: the fourth position of the soldering rod (from the origin), the setting range [0~999.99] mm.
5. Warm-up time: waiting time after the first position of the soldering rod arrives, the setting range is [0~999.99]S.
6. Soldering time: Waiting time after the second position of the soldering rod arrives, the setting range is [0~999.99]S.
7. Preheating speed: The speed during preheating and preheating, setting range [0~99%].
8. Solder speed: The speed of solder and solder detachment [0~99%].
9. Rotation angle: set the angle to be rotated, and set the range [0~999.99] degrees.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.