Huiyue semi-automatic vacuum impregnation machine detailed operation steps

2018-11-19 08:38:53 HUIYUECN 13

Our Dongguan Huiyue Technology Vacuum Immersion Machine has a fullyautomatic vacuum impregnation machine and a semi-automatic vacuumimpregnation machine. Today, Huiyue Xiaobian Li S will explain thenormal operation steps of the underarm semi-automatic vacuumimpregnation machine.
1. Open the impregnation cover and place the neat product impregnation tray on the cylinder bracket. Close the impregnation cover and use the quick clamp.

2. Twist the start switch and the vacuum pump starts. When the pressure gauge is displayed to 30-40mmhg, open the ball valveswitch under the cylinder to pump the varnish into the cylinder.

3. Twist the spotlight switch and observe through the cover glass.When the varnish reaches the required amount, close the ball valve underthe cylinder.

4. When the barometer pointer reaches 700mmhg or more, press the start switch to stop. Automatic Vacuum Impregnation Machine The alarm is given when the vacuum impregnation time reaches the set time. Open the cap valve switch to vent the gas when the gauge pointer returns to 0mmhg. Open the ball valve switch under the cylinder and turn off the ball valve switch after the cylinder has been drained.

5. Turn on the start switch and start the vacuum pump. When the gauge pointer reaches 700mmhg or more, press the stop switch twice in succession. When the vacuum is reached, the alarm is given when the set time isreached, and the ball valve switch is opened to discharge the gas.

6. After the vacuum is completed, open the cylinder head, take out the product, and finish the operation.

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.