CNC300AS servo winding machine controller (three-axis)
Large screen 192×64 dot matrix LCD, Chinese character display,
Using CPLD technology, high reliability, strong anti-interference ability,
Using FLASH ROM can store 100 kinds of winding data (999 segments), and each winding data is named separately, and any one of them can be called up at any time. Sudden power failure will not be lost.
The man-machine interface, humanized design, quick and simple operation, make the product setting with many steps more convenient,
It has the power-off memory function. When the power is suddenly cut off during the winding process, the current state and parameters can be recorded and saved. When the power is turned on, the product will continue to be wound after it is turned on to reduce the waste of raw materials.
The winding axis directly controls the servo drive, with high accuracy and efficiency, and the acceleration and deceleration slopes can be set.
The stepping motor of the winding shaft and the corner shaft provides 0-99 speed selection,
Spindle position and arranging axis parameters can be set by adjustment method, which is convenient for debugging equipment.
Automatic fault identification function, error occurs in setting parameters or winding, and automatically prompts the error location,
Strong compatibility, can directly replace the same type of controller or PLC,
The program can provide free upgrades,
Panel display: LCD screen display,
Spool motor type: AC servo,
Winding shaft motor power: equal to the motor power matched by the AC servo drive,
Winding shaft speed: 200～6000rpm (accuracy=1°),
Cable shaft motor: 2A two-phase hybrid stepping motor/external motor driver,
Angle motor: external motor driver,
Power supply voltage: AC220V/110V±10%,
Chassis size: 270mm*250mm*110mm