HY-K02 Tunnel type infrared transformer drying oven
Power supply / power 380V 42kw (customized)
Machine size customization
Oven outer size custom
Oven inner size custom
Electric heating device infrared heating tube heating;
The temperature control system adopts RKC temperature controller, SSR output temperature control, 370W wind motor, 9 inch thousand-page wind wheel, 50A ammeter, 500V voltmeter, insurance, heating pass protection, power switch; a total of 5 sets of temperature control. It can be heated in sections, each section is 2000mm, and each section has an independent temperature control system to balance the temperature. The control system controls the output of the heating wire through thermocouple induction according to the temperature point set by the temperature control table to achieve a dynamic balance.
1. The oven is folded into a 1.2mm cold rolled plate shell;
2. The inner chamber of the oven is made of 1.2mm stainless steel mirror panel;
3. The main beam of the oven body is made by 2.0mm hot plate bending;
4. The oven body tripod is formed by 50 * 50 * 1.5mm iron square pass welding;
5. The bottom is equipped with leveling angle cup;
6. Insulation adopts aluminum silicate wool and foamed silica gel for heat insulation; the thickness of the insulation layer is 100mm;
7. Spray paint on the surface of the oven (the color is computer white);
power system:
Transmission frequency conversion device: 1500W motor, double reducer (1: 200), switch and indicator light, the transmission mode is a chain type stainless steel mesh belt with a through rod to transmit the product.