Instructions for installation and commissioning of transformer automatic soldering machine
Our DongguanHuiyue Technology Automatic Soldering Machine is used for all kinds ofhorizontal and vertical coil soldering. This automatic soldering machineadopts computer CNC control system. It can take 1000 sets of stepmemory to meet the soldering requirements of each group at differentangles. Variety is easy and fast. The solder data of the product of CNC memory can be arbitrarily retrieved. The following is a brief introduction by Hui Yue Xiaobian to explain how the automatic soldering machine is installed.
壹 Take out the soldering machine and place it on a dry, stable, non-corrosive workbench.
2.When using power, first determine the voltage required to use theworking power Automatic Vacuum Impregnation Machinesupply voltage for the machine (green light is 220 volts,red light is 110 volts, when no power is applied.)
3.Place the soldering iron in the soldering iron (4) soldering ironframe, insert the soldering iron power plug into the soldering machinesocket, and turn on the temperature control switch.
Fourth,according to the needs of their own products, this choice of conduit,loaded into the fixed pipe hexagonal column, bolted tight.
5. Place the foot switch in a place where the foot is easy to operate.
Sixth, put the tin wire in the tin seat and introduce the tin guide.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.