How is the structure of the vacuum oven composed? Dongguan vacuum oven high temperature furnace

2019-06-22 09:28:06 HUIYUECN 0

How is the structure of the vacuum oven composed? Dongguan vacuum oven high temperature furnace

(1) Shape part: The shape is 2mm thick and cold plate is bent. The surface is high-temperature electrostatic spray (non-normal paint). It is corrosion-resistant, anti-rust and easy to clean. The dimensions are 0.75 meters wide, 0.6 meters deep and 1.6 meters high. , single door, with door buckle, handle. The bottom is equipped with movable casters for easy access to the oven.

(2) Inner part: The inner tank is made of 3.0mm thick 304# stainless steel plate, which does not rust, so that the furnace is clean and dust-free. Liner size: 0.4m wide, 0.4m high, 0.4m deep, 3 layers of net, 5 layer angles, four temperature control monitoring points and temperature display, 1 main temperature control point, inner liner Paving 100mm thick high-temperature silicic acid heat-insulating rock wool, adding high temperature resistance, environmental protection, pollution-free, anti-aging, high elasticity and sealing silica gel around the door, so that the temperature outside the furnace is not hot. The inner part of the inner part is provided with two nitrogen inlet holes and two nitrogen gas release ports, and the outlet port has a diameter of 15 mm.

(3) Heated part: The stainless steel heating plate made of Taiwan is externally placed, and the power is 5KW.

(4) Electrical parts: power supply 380V/AC, three-phase five-wire system, total power 6KW, with control electric box in the middle of the oven, using Taiwan Panda P-909A microcomputer programmable digital display thermostat (16 segments, Each section can be set independently with different temperature and baking time. The temperature control can control the time and temperature from 200 °C to 300 °C for 25~30 minutes. The temperature display accuracy of the thermostat is ±1 degree, with PV and SV. The digital display window uses a module continuous buffered output control heater, which uses SSR solid state relay output.

(5) Vacuum part: adopts direct-coupled rotary vane mechanical vacuum pump, the power is 0.55KW, the suction port diameter is 40mm, the vacuum degree can reach -0.1mpa, and the vacuum pressure gauge is equipped.

Vacuum oven high temperature furnace.jpg

Vacuum oven high temperature furnace.jpg

The above is how the structure of the vacuum oven is composed? Dongguan vacuum oven high temperature furnace introduction, if you need to buy or customize vacuum oven high temperature furnace, you need to buy or customize transformer automatic production equipment, you can contact our company, contact our business staff to buy or customize, thank you.


I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following is the introduction of our company and some automation equipment supplied by our company. If you need to purchase or customize these equipments, you need to purchase or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards. The product series include: transformer inserter, transformer EI inserter, ei type transformer automatic inserter, transformer core inserter, transformer automatic casing machine,Transformer automatic through insulation casing machine,transformer core assembly machine, Transformer core assembly rubberizing machine, (automatic core assembly + package tape + test + wobble plate), transformer winding machine, transformer automatic winding machine, Automatic Coil Winding Machine,transformer coil winding machine, CNC winding machine, CNC automatic winding Machine, CNC coil winding machine, CNC single-axis winding machine, single-axis coil automatic winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/12 axis Automatic winding machine, 6/8/16/12 axis automatic transformer winding machine, Transformer Core Automatic Winding MachineCoil Spindle Winding MachineSingle Spindle Winding Machine,automatic winding + wrapping tape machine, (USB charger automatic film wrapping machine), automatic rubberizing machine, semi-automatic tape conveyor, transformer Double pressing automatic rubberizing machine, transformer magnetic ring inductance double pressing automatic rubberizing machine, vacuum impregnation machine, (with single and double cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic vacuum impregnation machine), Vacuum pressure impregnation electric motor equipmentvacuum pressure impregnation process for transformersvacuum pressure impregnation (vpi),automatic Soldering machine and semi-automatic soldering machine (also called flip soldering machine) Transformer flip soldering machine,transformer automatic flip soldering machine, Angular Soldering MachineTransformer Angular Soldering Machine,double head soldering machine, desktop automatic dispensing machine, full vision COB dispensing machine, magnetic ring inductance pulling and shearing machine, magnetic ring inductance automatic foot machine, automatic Lock screw machine, double Y-axis coordinate type automatic locking screw machine, transformer potting vacuum defoaming machine, transformer copper foil backing machine, computer cutting wire stripping machine,automatic taping machineautomatic coil taping machineTransformer Automatic Taping Machinetransformer core taping machinetransformers core taping machine,transformer comprehensive tester, automatic constant temperature oven, infrared tunnel furnace, ultraviolet High-frequency transformer peripheral automation equipment such as curing oven and baking line. The products are widely used in high and low frequency transformers, ballasts and motor factories. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

The following is the contact information of our company. If you need to purchase or customize the above listed machinery and equipment, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Contact: Phone / WeChat: 18819603799
              QQ: 3407993243
              Email:3407993243@qq.com
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM