HY-K02 infrared tunnel furnace debugging steps

HY-K02 infrared tunnel furnace debugging steps

 HY-K02 infrared tunnel furnace meets international high temperature line: 62, 42 standard, fully automatic temperature control, saves 2-5 times than traditional vertical oven, saves electricity more than 30%, works efficiently, and raises temperature by 20% in the industry. It is mainly applied to the baking, constant temperature, heat treatment and other processes of PCB circuit boards, high-frequency transformers, electronic components and other electronic products. The quality assurance is provided. All the machine materials are genuine for the big factory. Please purchase the high-quality tunnel furnace. Dongguan Juke patented products, for your company to produce bit by bit drop cost, every second and second increase efficiency, then Juke Xiaobian for everyone to introduce HY-K02 infrared tunnel furnace debugging steps, please read the following:

 1, receive electricity
Three-phase five-wire system (three-phase 380V), the fire line is connected to the main power switch, the neutral line is connected to the neutral line, and the ground line is connected to the ground line. After turning on the power, check if the conveyor line is blocked. Press the start switch to check the running direction of the motor. If there is no operation, the phase sequence is wrong. Please reverse the two power lines of the three phases.

2, adjust the delivery time
1) Adjust the rotary terminal on the digital display controller, observe the change of the value, and calculate the time required for the material to flow out according to the speed.

3, temperature control
1) Set the temperature:
Press SET---SV to flash---move the arrow button to set the desired temperature---press the SET button to complete the setting.
2) Temperature correction:
Measure the actual temperature at the temperature sensing bar. If the difference between the displayed temperature and the displayed value is greater than 5 degrees, the compensation value needs to be modified.
Temperature correction method:
    If the actual measurement temperature is 125 degrees and the thermometer shows 120 degrees, then the SC parameter is set to 5, the actual measurement temperature is 125 degrees, and the temperature table displays 130. Then the SC parameter is set to -5.
Reminder: Change the offset parameter value. Will directly affect the furnace temperature, please measure the temperature and then set. Re-verify to avoid excessive temperature and cause the baked material to be scrapped.

4, institutional adjustment
1) Exhaust vent adjustment
The exhaust vent has a regulating damper. Under normal circumstances, it is all open. If the temperature does not reach the set value, the diameter of the damper can be reduced according to the direction of the arrow, but the damper cannot be reached at the minimum position. There is a danger of explosion if the solvent concentration is too high.

5, the operation steps
1) Turn the air switch handle to the ON position, turn on the main power, and the power indicator lights.
2) When starting up, turn on the power switch, then turn on the conveyor control switch (do not need to be enabled or not), then turn on the hot start switch, and the indicators will light up and enter the working state.
3) When stopping, first turn off the heating, then turn off the conveyor switch, then press the emergency stop, the machine stops working.

Service hotline: 4000-121-682
Factory Tel: 0769-89870552
Corporate Fax: 0769-86475353
E-mail: dg@cnhuiyue.com

Below is a tunnel furnace HD picture:

Juke tunnel furnace control panel

Juke Tunnel Furnace Timer

Tunnel furnace inverter debugging

Juke tunnel furnace box protection

The above is the introduction of the HY-K02 infrared tunnel furnace debugging steps. If you need to purchase or customize the HY-K02 infrared tunnel furnace, please contact our company and contact our business staff for purchase or customization. Thank you.

I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following are the company introductions of our company and some mechanical equipments produced and supplied by our company. If you need to purchase or customize these machines, you need to purchase or customize the transformer automatic production equipment. Please contact us to contact our business staff for purchase or customization. ,Thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards. The product series include: transformer inserter, transformer EI inserter, ei type transformer automatic inserter, transformer core inserter, transformer automatic casing machine, Insulation casing automatic through machine，transformer core assembly machine, Transformer core assembly rubberizing machine, (automatic core assembly + bag tape + test + wobble plate), transformer winding machine, transformer automatic winding machine,automatic winding machine, transformer coil winding machine, transformer coil automatic winding machine, CNC winding machine, CNC automatic Winding machine, CNC coil winding machine, CNC single-axis winding machine, Coil Spindle Winding Machine，Single Spindle Winding Machine，single-axis coil winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/12 axis Fully automatic winding machine, 6/8/16/12 axis automatic transformer winding machine,Transformer Core Automatic Winding Machine， automatic winding + tape machine, (USB charger automatic film wrapping machine), automatic rubberizing machine, semi-automatic tape machine, Transformer double pressing automatic rubberizing machine, transformer magnetic ring inductance double pressing automatic rubberizing machine, Vacuum pressure impregnation electric motor equipment，vacuum pressure impregnation process for transformers，vacuum impregnation machine, (with single and double cylinder difference: automatic single cylinder vacuum impregnation machine, double cylinder automatic vacuum impregnation machine), vacuum pressure impregnation (vpi)，Automatic soldering machine and semi-automatic soldering machine (also called flip soldering machine), Angular Soldering Machine，Transformer Angular Soldering Machine，Transformer flip type soldering machine, transformer automatic flip soldering machine, double head soldering machine, automatic dispensing machine, desktop automatic dispensing machine, full vision COB dispensing machine, magnetic ring inductance pulling and shearing machine, magnetic ring inductance automatic Whole foot machine, automatic locking screw machine, double Y-axis coordinate type automatic locking screw machine, computer cutting wire stripping machine, transformer filling vacuum defoaming machine, transformer automatic copper foil adhesive machine, automatic taping machine，automatic coil taping machine，Transformer Automatic Taping Machine，transformer core taping machine，transformers core taping machine，transformer comprehensive tester, automatic constant temperature Oven, infrared tunnel furnace, UV curing oven, baking line，Transformer assembly production line，core automation production line and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency transformers, ballasts and motor manufacturers. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

The following is the contact information of our company. If you need to purchase or customize the products listed above, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Manufacturer Tel: 0769-89870552
Company website: http://tc.huiyuecn.com
Contact: Phone / WeChat: 18819603799
              QQ: 3407993243
              Email:3407993243@qq.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City