Infrared tunnel furnace troubleshooting method
HY-K02 infrared tunnel furnace meets international high temperature line: 62, 42 standard, fully automatic temperature control, saves 2-5 times than traditional vertical oven, saves electricity more than 30%, works efficiently, and raises temperature by 20% in the industry. It is mainly applied to the baking, constant temperature, heat treatment and other processes of PCB circuit boards, high-frequency transformers, electronic components and other electronic products. The quality assurance is provided. All the machine materials are genuine for the big factory. Please purchase the high-quality tunnel furnace. Dongguan Juke patented products, then Juke Xiaobian for everyone to introduce HY-K02 infrared tunnel furnace troubleshooting method, please read the following:
1, the power supply has no display
Solution: Check if the power supply has electricity and the fuse is blown;
2. The wind volume of the fan is small or the fan is not running.
(1) Check if the fan motor is reversed (normally clockwise). If reverse, please exchange the two-phase line.
(2) If the fan does not run, please check whether the fan thermal overload relay is overloaded. If it is overloaded, please adjust the red overload code of the thermal overload relay to the appropriate current indication position.
3, the temperature does not rise
(1) Check if the mechanical over-temperature protection is adjusted to the proper position;
(2) Check if the current meter pointer indicates the “9” amp position. If there is no indication, please check if the heating tube is burnt out;
(3) Adjust the control settings according to the instructions of the temperature control table.
4, automatic heating timing function is invalid
(1) Check if the time relay is faulty. If it is faulty, please replace it.
(2) Infrared tunnel furnace Refer to the temperature control table manual Press and hold the SET button to enter the control setting interface, and then enter the “SL” option to adjust the value to one degree lower than the set temperature.
HY-K02 infrared tunnel furnace
Stainless steel strip tunnel furnace
Stainless steel video tunnel furnace
Stainless steel infrared tunnel furnace
Stainless steel mesh belt tunnel furnace (encrypted)
The above is the introduction of the infrared tunnel furnace troubleshooting method. If you need to purchase or customize the infrared tunnel furnace troubleshooting method, please contact our company and contact our business staff for purchase or customization, thank you.
I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.
The following are the company introduction of our company and some transformer automatic production equipment produced by our company. If you need to purchase or customize, please contact our company and contact our business staff for purchase or customization. Thank you.
Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.
Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards, and its product series include: transformer inserting machine, ei type transformer inserting machine, transformer EI inserting machine, transformer core inserting machine, transformer automatic casing machine,automatic through insulation casing machine， transformer core assembly machine, transformer Magnetic core assembly rubberizing machine, (automatic magnetic core assembly + wrapping tape + test + wobble plate), Transformer Winding Machine，transformer automatic winding machine,Transformer Core Automatic Winding Machine，Automatic Coil Winding Machine， transformer coil automatic winding machine, Coil Spindle Winding Machine，Single Spindle Winding Machine，CNC winding machine, CNC coil winding machine, single axis CNC Winding machine, single-axis coil winding machine, single-axis winding machine, double-axis winding machine, multi-axis winding machine, 6/8/16/12-axis automatic winding machine, 6/8/16/12 Axis automatic transformer winding machine, automatic winding + tape machine, (USB charger automatic film machine), automatic rubberizing machine, semi-automatic tape machine, transformer double pressing automatic rubberizing machine, transformer magnetic ring inductance Double press automatic rubber laminating machine, Vacuum pressure impregnation electric motor equipment，vacuum pressure impregnation process for transformers，vacuum impregnation machine, (single single and double cylinder difference: single cylinder automatic vacuum impregnation machine, automatic double cylinder vacuum impregnation machine), vacuum pressure impregnation (vpi)，transformer flip automatic soldering machine, transformer flip soldering machine, Double soldering machine, Transformer Angular Soldering Machine，Angular Soldering Machine，automatic soldering machine and semi-automatic soldering Machine (also called flip soldering machine), automatic taping machine，Transformer Automatic Taping Machine，transformer core taping machine，automatic coil taping machine，automatic dispensing machine, desktop automatic dispensing machine, full vision COB dispensing machine, magnetic ring inductance automatic foot machine, magnetic ring inductance pulling and shearing machine, automatic locking screw machine, Double Y-axis coordinate automatic locking screw machine, transformer filling vacuum defoaming machine, transformer copper foil adhesive machine, computer cutting wire stripping machine, automatic constant temperature oven, transformer comprehensive tester, infrared tunnel furnace, ultraviolet curing oven, Transformer assembly production line，core automation production line，drying High-frequency transformer peripheral automation equipment such as baking line, the products are widely used in high and low frequency transformers, ballasts and motor manufacturers. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.
The following is the contact information of our company. If you need to purchase or customize the equipment listed above, you need to buy or customize the transformer automatic production equipment. You can contact our company and contact our business staff for purchase or customization. Thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Dongguan Juke Industrial Contact: Phone / WeChat: 18819603799
Manufacturer Tel: 0769-89870552
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.