Voice coil winding machine market type - winding machine manufacturers produce

2019-05-31 10:18:53 HUIYUECN 0

Voice coil winding machine market type - winding machine manufacturers produce

Today, Juke Xiaobian introduces you to the introduction of the types of voice coil winding machines on the market. As the name suggests, the voice coil winding machine is a coil wound, mainly used in the industry of speaker lead, vibration motor, etc., a common voice coil 40 layers. According to the calculation of the number of turns, the output of a six-station winding machine for 24 hours can reach 30,000 or so. First of all, we must have a good understanding of the wire type characteristics of the wound coil, the number of product turns, the number of layers and the appearance material, and the winding speed requirement. As shown below:
Voice coil winding machine market type - winding machine manufacturers produce.jpg

 When the winding machine is wound, the swing of the gemstone needle is synchronized with the winding main shaft, but the swing amplitude is smaller than when the forced cable is used separately, leaving a certain room for the free cable to exert its tightly-distributed characteristics. CNC fine-line voice coil winding machines are slowly emerging, and many companies need to start using them. The main principle of the winding of the voice coil winding machine is generally two kinds of cable winding methods, namely free cable and forced cable. The following giant science industry introduces you to the two most commonly used voice coil winding machines on the market:

 1. Free cable voice coil winding machine:
The tension of the free line and the swing of the oscillating wheel or the pendulum are arranged, and the distance between the guide wheel and the bobbin is far. As long as the adjustment is proper, each line can be closely arranged, which can completely circumvent the line. The coil achieves a "mirror surface" effect, but it is difficult to adjust, mainly because of the amount of mechanical debugging.

 2. Forced cable voice coil winding machine:
Forcing the cable to use the synchronous movement technology of the winding spindle and the cable spindle, so that each winding, the cable mechanism enters a certain distance, generally the distance of one wire diameter, one point, the forced wire mode uses high speed It is very difficult to wind a coil of 0.1 mm or less, and there is often a disorder. The new scheme adopts two ways of compounding, taking its length to make up its short, mainly for forced cable, supplemented by free cable, the distance between the gem needle and the coil skeleton is enlarged, and the control system is based on this distance and the set winding. Line parameters, calculate the actual cable parameters, and then modify according to the actual debugging, because the control system has power-down protection function, for each type of coil, in fact, debugging can quickly get the ideal winding parameters and save.

The above is the introduction of the type of winding machine in the voice coil winding machine. If you need to buy or customize the voice coil winding machine, please contact our company and contact our business staff for purchase or customization. Thank you.


I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier.

The following are the company introduction of our company and some transformer automatic production equipment supplied by our company. If you need to purchase or customize the transformer automatic production equipment, please contact our company and contact our business staff for purchase or customization, thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards, and its product series include: transformer inserting machine, ei type transformer inserting machine, transformer EI inserting machine, transformer core inserting machine, transformer automatic casing machine,Insulation casing automatic through machine, transformer core assembly machine, transformer Magnetic core assembly rubberizing machine, (automatic magnetic core assembly + wrapping tape + test + wobble plate), Coil Spindle Winding MachineSingle Spindle Winding Machine,transformer winding machine, transformer automatic coil winding machine, CNC automatic winding machine, CNC coil winding machine, single axis CNC Winding machine, single-axis coil winding machine, single-axis winding machine, double-axis winding machine, 6/8/16/12-axis automatic winding machine, 6/8/16/12-axis automatic transformer winding Machine, automatic winding + tape machine, (USB charger automatic film machine), automatic rubberizing machine, semi-automatic tape machine, transformer double pressing automatic rubberizing machine, magnetic ring inductance double pressing automatic rubberizing machine , Vacuum pressure impregnation electric motor equipmentvacuum pressure impregnation process for transformersvacuum pressure impregnation (vpi)vacuum impregnation machine, (there are single and double cylinder differences: single cylinder automatic vacuum impregnation machine, double cylinder automatic vacuum impregnation machine), transformer flip automatic soldering machine, double head soldering machine,Transformer Angular Soldering Machine, automatic soldering machine and semi-automatic soldering machine (also Called flip soldering machine),automatic taping machineautomatic coil taping machineTransformer Automatic Taping Machinetransformer core taping machine, transformer copper foil adhesive machine Automatic dispensing machine, desktop automatic dispensing machine, full vision COB dispensing machine, computer cutting wire stripping machine, magnetic ring inductance automatic foot machine, magnetic ring inductance pulling and shearing machine, automatic locking screw machine, double Y Axis coordinate automatic locking screw machine, transformer filling vacuum defoaming machine, automatic constant temperature oven, transformer comprehensive tester, infrared tunnel furnace, ultraviolet curing furnace, baking line,Transformer assembly production linecore automation production line, and other high-frequency transformer peripheral automation equipment, products are widely used in high and low frequency Transformer, ballast and motor factory industry. In order to meet the needs of the market, in 2008, an branch of Yixiu District, Anqing City, Anhui Province, formed a group of professional and technical personnel to provide quality services to customers.

The following is our contact information. If you need to purchase or customize the products listed above, you need to buy or customize the transformer automatic production equipment, please contact our company, contact our business staff for purchase or customization, thank you.
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Contact: Phone / WeChat: 18819603799
                 QQ: 3407993243
                 Email:3407993243@qq.com
                 Manufacturer Tel: 0796-89870552
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jupiter Industrial Park, Jufeng, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM