How to make a sub-winding motor coil

2019-05-17 11:08:33 HUIYUECN 0

How to make a sub-winding motor coil

  Before winding, check the specifications of the electromagnetic wire and the thickness of the insulation. If necessary, place the binding tape in the binding groove of the winding die to prepare for winding the coil.
   
The starting end of the winding is usually hung on the right hand side, winding from right to left, and the concentric winding is wound from a small circle. Lines should be arranged neatly, pay attention to the insulation of the wire at any time. If there is damage, it should be properly wrapped or cut off, but the broken head should be left at the end to facilitate welding and remove the burr, and put on the yellow wax tube.
   
When winding, you must tighten the wire so that the wire does not bend and clamp the wire, as shown in the following figure. The coil lead wire is left at the end for connection. After the coil is wound, carefully check the number of turns. After correcting the coil, tighten the coil and then remove it. If the wire is too thick and the rule is difficult, use more than two wires.
How to make a sub-winding motor coil.jpg

  If the coils of a pole phase group are connected together, then a wire of a certain length should be left after the winding to make a connection between the pole phase groups; if the coils of the phase phase are wound together, the line between the pole phase groups is best. The sleeve is pre-applied before winding.


The above is how to make a reference to the sub-winding motor coil. If you need to buy or customize the stator winding motor coil winding machine, you can contact our business staff to purchase or customize, thank you.


The following are the company introduction of our company and some transformer automatic production equipment supplied by our company. If you need to purchase or customize the transformer automatic production equipment, you can contact our company and contact our business staff for purchase or customization. Thank you.

I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automation production equipment supplier. If you need to buy or customize transformer automation production equipment, you can contact our business staff to purchase or customize, thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.
Juke Industry adheres to European standards. The product series include: transformer inserting machine, transformer EI inserting machine, transformer core inserting machine, transformer automatic casing machine,automatic through insulation casing machine, transformer core assembly machine, transformer core assembly rubberizing machine, (Full-automatic magnetic core assembly package tape test swing plate), automatic winding machine,Transformer Coil Winding Machine, CNC winding machine, CNC single-axis winding machine, single-axis coil winding machine, single-axis winding machine, double-axis winding machine, Multi-axis winding machine, 6/8/16/12-axis automatic winding machine, 6/8/16/12-axis automatic transformer winding machine, automatic winding + wrapping tape machine,Single Spindle Winding MachineCoil Spindle Winding Machine, (USB charger automatic package Membrane machine), automatic rubberizing machine, semi-automatic tape machine, transformer magnetic ring inductance double pressing automatic rubberizing machine,Vacuum pressure impregnation electric motor equipmentvacuum pressure impregnation process for transformersvacuum pressure impregnation (vpi)vacuum impregnation machine, (single single and double cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic Vacuum impregnation machine), transformer flip type soldering machine, double head soldering machine, automatic soldering machine and semi-automatic soldering machine (also called flip soldering machine), Transformer Angular Soldering Machine,full visual COB dispensing machine, transformer comprehensive tester, computer cutting and stripping machine, Automatic constant temperature oven, magnetic ring inductors Body machine, magnetic core inductor automatic foot machine, double Y-axis coordinate type automatic locking screw machine, desktop automatic dispensing machine, transformer filling vacuum defoaming machine, transformer automatic copper foil adhesive machine, automatic taping machineautomatic coil taping machinetransformers automatic taping machinetransformer core taping machinecore automation production lineTransformer assembly production line,infrared tunnel furnace, ultraviolet High-frequency transformer peripheral automation equipment such as curing oven and baking line. The products are widely used in high and low frequency transformers, ballasts and motor factories. In order to meet the needs of the market, in 2008, in Yixiu District, Anqing City, Anhui Province, a group of professional and technical personnel to provide quality services to customers.

The following is the contact information of our business officer Miss, if you want to customize or purchase the products listed above, you need to buy or customize the transformer automatic production equipment, you can contact our business officer Miss to buy or customize, thank you.
This is the contact information of our business officer Miss:
Phone / WeChat: 18819603799
QQ: 3407993243
Email:3407993243@qq.com
Dongguan Juke Industrial Factory Tel: 0769-89870552
Dongguan Juke Industrial Development Co., Ltd. Website: http://tc.huiyuecn.com
If you need to buy or customize transformer automation production equipment, you can contact our business officer Miss to buy or customize, thank you.

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM