12-axis automatic winding machine solenoid valve installation graphic tutorial

2019-05-11 10:33:48 HUIYUECN 0

12-axis automatic winding machine solenoid valve installation graphic tutorial
12-axis automatic winding machine solenoid valve installation tutorial.jpg

 Dongguan Juke Industrial Yanggong, finishing for more than a month, today wrote an original technical article on the 12-axis automatic winding machine solenoid valve installation tutorial, accompanied by graphic introduction, before writing, I will first say In a sentence, every word in this article is played by me. Each picture is taken by my mobile phone. 100% original, it is an exclusive cheat. Then let's take a look at how to install the 12-axis automatic winding machine solenoid valve.


First of all, we have to prepare these things before installing the solenoid valve: deflector, solenoid valve, pipe connection. As shown in Figure 1

(Figure 1):12-axis automatic winding machine solenoid valve installation tutorial.jpg

We need to prepare these things before installing the solenoid valve: deflector, solenoid valve, pipe connection. As shown in Figure 2.

(Figure II):112-axis automatic winding machine solenoid valve installation tutorial.jpg

In the first step, we first disassemble the solenoid valve and place the gasket on the deflector. Figure 3

(Figure 3):12-axis automatic winding machine solenoid valve installation tutorial.jpg

In the second step, install the solenoid valve on the deflector. Remember that the screws on both sides should be locked at the same time and cannot be turned to one side. Figure 4

(Figure 4):12-axis automatic winding machine solenoid valve installation tutorial.jpg

In the third step, the thread under the pipe is wound around the raw tape, and if it is not wound, it will leak. Figure 5

 (Figure 5):12-axis automatic winding machine solenoid valve installation tutorial.jpg

In the fourth step, the pipe joint is screwed to the installation position of the solenoid valve. Figure 6

(Figure 6):12-axis automatic winding machine solenoid valve installation tutorial.jpg

Finally, the plug hole and the muffler are installed, and the baffle is especially introduced here. Figure 7

(Figure 7):12-axis automatic winding machine solenoid valve installation tutorial.jpg

The baffle used here can be seen from the figure. There are three holes at both ends. The hole in the middle is used as the air inlet hole, and the two holes next to it are used as the vent holes. Therefore, the hole in the middle of one end as the inlet pipe joint must be blocked in the middle of the other end; likewise, after the two vent holes are added to the muffler at one end, the corresponding other end must be blocked. Click on the picture below to learn about our HY-R18 12-axis automatic winding machine (with plastic structure) HD operation video


I am Dongguan Juke Industrial Development Co., Ltd., our company is a transformer automatic production equipment supplier. If you want to buy or customize transformer automatic production equipment, you can contact us for purchase or customization, thank you. The following are the company introduction of our company and some transformer automatic production equipment produced by our company. If you want to customize or purchase transformer automatic production equipment, you can contact our business staff to purchase or customize, thank you.

Dongguan Juke Industrial Development Co., Ltd. is a professional automation workshop production line solution provider for high frequency transformer peripheral equipment.

Juke Industry is dominated by Taiwanese technology, and all raw materials are selected and processed in strict accordance with Taiwan Standard Huai, and with the excellent technology and professional services to create maximum value for customers, and determined to become the world's high-frequency transformer automation equipment program The leading brand.

Juke Industry adheres to European standards. The product series include: transformer inserting machine, ei type transformer inserting machine, transformer EI inserting machine, transformer core inserting machine, transformer automatic casing machine,Transformer automatic through insulation casing machine, transformer automatic core assembly machine, Transformer core assembly rubberizing machine, (automatic core assembly + bag tape + test + wobble plate), automatic winding machine, CNC winding machine, CNC coil winding machine, CNC single-axis winding machine, single-axis winding Wire machine, double shaft winding machine, multi-axis winding machine, single-axis coil winding machine, 12-axis automatic winding machine, automatic winding + wrapping tape machine, Coil Spindle Winding Machine,(USB charger automatic film wrapping machine), automatic Packing machine, semi-automatic tape machine, transformer winding machine, automatic taping machinetransformers automatic taping machinetransformer core taping machineautomatic coil taping machineTransformer Automatic Taping MachineSingle Spindle Winding Machinevacuum pressure impregnation process for transformersVacuum pressure impregnation electric motor equipmentvacuum pressure impregnation (vpi)vacuum impregnation machine, (single and double cylinder difference: single cylinder automatic vacuum impregnation machine, double cylinder automatic vacuum impregnation machine), transformer automatic flip soldering machine ,Angular Soldering Machine, automatic soldering machine and semi-automatic soldering machine (also called flip soldering machine), magnetic core inductor automatic foot machine, copper foil adhesive machine, infrared tunnel furnace, ultraviolet curing furnace,core automation production lineTransformer assembly production line, baking line and other high-frequency transformer peripheral automation equipment, products is widely used in Low-frequency transformers, ballasts and electrical plant health sectors. In order to meet the needs of the market, in 2008, in Yixiu District, Anqing City, Anhui Province, a group of professional and technical personnel to provide quality services to customers.

This is the contact information of our business officer Miss, need to customize or purchase transformer automatic production equipment, you can contact our business officer Miss to buy or customize, thank you.
Contact information of the official officer of Dongguan Juke Industrial Co., Ltd.:
Phone / WeChat: 18819603799
QQ: 3407993243
Email:3407993243@qq.com
Manufacturer Tel: 0769-89870552
Company Name: Dongguan Juke Industrial Development Co., Ltd.
Company website: http://tc.huiyuecn.com
Address: Room 406, 4th Floor, Jufeng Qinlai Industrial Park, No. 53 Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City
The above is the company introduction of our company and some transformer automatic production equipment produced by our company. If you need to purchase or customize the transformer automatic production equipment, please contact our business officer, please contact her for purchase or customization, thank you.

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM