Automatic single cylinder vacuum impregnation machine manual operation steps
Our HY-Z02 automatic single-cylinder vacuum impregnation machine is fully controlled by CNC single-chip microcomputer. When you use automatic single-cylinder vacuum impregnation machine, you want to use manual operation. First, you must first enter the controller. The dynamic mode is further step by step.The following is a detailed explanation of the Automatic Vacuum Impregnation Machine by Juke Xiaobian.
1, dry vacuum, liquid, vacuum, pressure, reflux, deflation, deliquoring, counter, one reflux, secondary deflation.
2, dry pumping, vacuum, liquid, vacuum, reflux, deflation, deliquoring, counter, secondary reflux, secondary deflation. SV is the set value, PV is the elapsed value, the liquid level switch is valid when it is automatic, there is no time manually, and there is no liquid level control.
System time setting: dry vacuum for 5 minutes, liquid in 480 seconds, vacuum for 20 minutes, back pressure for 10 minutes, reflux for 10 minutes, deflation for 3 minutes, de-liquidization for -8 minutes, counter 3 times.
Temperature setting: 45 degrees - 65 degrees
Deli setting: 20-27 rev / min
Pressure vacuum set to +0.3
Vacuum is set to -0.1
Impregnation time setting: 3-5 hours (based on core package size)
Impregnation temperature and practice setting: regulation is 50-65 degrees, 8×12 core package is set for 2 hours, 10×17 core package is set for 3 hours.
Into the liquid operation: first close the lower valve, open the inlet valve, manually click on the touch screen, vacuum and reflux, the liquid will automatically enter.
Drain operation: open the lower valve, close the upper valve, click the touch screen by hand, enter the liquid, pressurize, the liquid will be automatically discharged
Our HY-Z02 automatic single-cylinder vacuum impregnation machine has two functions, which can be fully automatic or manually operated. The automatic single-cylinder vacuum impregnation machine is: liquid, vacuum, pressure, reflux, deflation, de-liquid, counter, secondary reflux, secondary deflation. SV is the set value, PV is the passing value, all are fully automatic, and only one button can be used to complete the steps. Below is the physical picture of our automatic single-cylinder vacuum impregnation machine for your reference.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.