Transformer factory dip paint new equipment single cylinder / double cylinder automatic vacuum impregnation machine

2019-04-23 09:39:33 HUIYUECN 0

Transformer factory dip paint new equipment single cylinder / double cylinder automatic vacuum impregnation machine

Transformer factory dip paint new equipment single cylinder / double cylinder automatic vacuum impregnation machine.jpg

Transformer factory dip paint new equipment single cylinder / double cylinder automatic vacuum impregnation machine.jpg


 Transformer factory dip paint new equipment single cylinder / double cylinder automatic vacuum impregnation transformer factory dip paint new equipment single cylinder / two cylinder automatic vacuum impregnation machine. The vacuum impregnation machine uses a 50KG hydraulic rod to support the top cover. The top cover is sealed with silicone rubber and the cover is quickly clamped. The operation is simple, safe and pollution-free.The top cover is sealed with silicone rubber and the cover is quickly clamped. The operation is simple, safe and pollution-free. And various types of plastic PU raw materials vacuum degassing process. Therefore, the use of vacuum dipping paint is a process that is unmatched by traditional dipping paints and equipment that enhances market competitiveness. The vacuum impregnation machine is the production equipment necessary for the high standards and high requirements of the modern electronics industry. It is also the production equipment necessary for products to enter the international market. It has a good effect on improving the quality of the product and prolonging the life of the product. The automatic switch box cover and the second automatic vacuum pumping save time and effort, environmental protection and energy saving, and can realize single-person multi-machine operation.

 Transformer factory dip paint new equipment single cylinder / two cylinder automatic vacuum impregnation machine, all Chinese PLC controller operation. The use of vacuum dipping paint is several times shorter than the traditional dipping process, and it also shortens the time and loss of materials in the dripping process, directly reduces production costs, and improves product quality and market competitiveness. The vacuum degassing process of small resin crafts has the advantages of uniform, thorough, and short time for penetration, filling and degassing. Its insulation performance can be greatly improved, reducing the power consumption of the product, vibration noise and low temperature rise, etc. The coil is insulated under vacuum negative pressure, and the insulating oil can penetrate into the fine pores of the coil quickly, uniformly and thoroughly. And in the gap, and the surface is smooth. Through the vacuum insulation treatment, the stepper motor drive precision ball screw is used to move the sub-tank lift type, and the lifting height can be preset (the maximum stroke of the sub-slot is 60mm; the displacement accuracy is ±0.05mm). The intelligent vacuum is applied to achieve the bubble-free varnish, and the impregnation effect is beautiful. Vacuum impregnating machine is mainly used in the insulation and dipping process of various large, medium and small transformers, inductors, ballasts, relay contacts, motors, motors, electronic mid-circumference, frequency modulators and other electronic components. It is also suitable for resin filling and electrolytic capacitors of various metal film capacitors. The standard impregnation machine is approximately 80mm high (custom height can be customized according to customer requirements).

Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM