The use of vacuum impregnation machine for infiltration of electronic products
Our Dongguan Juke Industrial Vacuum Immersion Machine is controlled by PLC controller. vacuum impregnation machine whole process is fully automatic operation, no manual viewing is required, and the automatic alarm prompts after completion. Today, Juke Xiaobian explains with you why electronic products should be impregnated with a vacuum impregnation machine. What kind of work does the electronic product infiltrate through the vacuum impregnation machine?
The presence of pores in the material is a ubiquitous phenomenon, especially in the die casting and powder metallurgy manufacturing process due to the residual pores, crystal shrinkage, etc., a large number of micropores, sand holes, cracks, etc., microporous leakage will be inevitable. It brings hidden dangers to the use of machinery and equipment. Even for applications without pressure requirements, plating, painting and surface treatment of plating solution, acid solution, etc. may cause internal corrosion inside the casting, which shortens the service life of the parts due to micropores. The presence of the surface causes painting, electroplating, etc. to form bubbles or irregularities. The scrapping of products through infiltration is almost zero, greatly saving costs and making full use of limited resources, and the products manufactured are more perfect.
Dongguan vacuum impregnation machine customized: can be customized according to customer requirements.
Dongguan Juke Industrial Vacuum Impregnation Machine Physical Map Introduction:
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.